OUTDATED - This version has been updated and is obsolete.
Please see the current release found in the Current Release area of the forums.

Fixes:

- Fixed status reporting of Z-Wave devices (such as motion sensors, etc.)
- Network Resources actions are queued when run from programs rather than run inline
- Fixed NLS strings for formatted values in ISY events for all node servers
- Fixed NLS strings for formatted values in ISY events for nodes using encoded editors
- Fixed XML crash when doing variable substitution in Network Resources
- IPv6 not allowing regular connection
- Invalid UUID sent to the portal 

Enhancements:

- Backup from 994 and Restore on Polisy!
WARNING:
- Everything is migrated except for Z-Wave
- If you're also changing PLMs, please make sure you also Restore the PLM
- Test binary network resources

Bugs:
- USB connected dongles (such as the PLM or Z-Wave Zooz Stick), cannot be unplugged and then plugged back in while ISY service is running. If, for any reason, you need to unplug, please use the Admin Console | Configuration tab | Reboot button to restart the service

How To Install:

- First, backup please!
- If on 5.2.0, Admin Console | Help | Automatically Upgrade. Once the Admin Console closes, wait 30 seconds before trying again. If Polisy does not show up in the ISY Launcher, please wait 60 seconds and reboot 
- Click the button on the front only once 
- Otherwise, ssh and do:
sudo pkg update && sudo pkg upgrade

How to use Z-Wave:

- Plugin your Zooz Stick in one of the USB ports on ISY
- Go to Admin Console | Configuration, check Z-Wave Support checkbox. Save and then click on the Reboot button  
- From that point, Z-Wave works as it does on the ISY-994 with the following exceptions
--- Backup/Restore of the Z-Wave dongle is not yet available
--- Z-Wave | Z-Wave Version is likely to be blank
- Note: for now, S2 is not yet supported 

 

With kind regards,
Michel

One question: will the restore overwrite any testing stuff we've been doing on our ISY Polisy, or should be delete everything first (or just delete the configuration file)?

Awesome, and thanks!

@Bumbershoot,

It moves /FILES/CONF directory and backs it up somewhere. So, you will lose everything. That's why it's best to backup before you restore a 994 backup.

With kind regards,
Michel

1 minute ago, Michel Kohanim said:

@Bumbershoot,

It moves /FILES/CONF directory and backs it up somewhere. So, you will lose everything. That's why it's best to backup before you restore a 994 backup.

With kind regards,
Michel

In my case, losing every is just fine.   I assume that Z-Wave backup/restore is in the works?

Thanks again!

Z-Wave motion sensors are working.  Thank you.

So now it gets to the point to ask what ISY on Polisy can do that ISY994 plus Polisy cannot. What is my incentive to move anytime soon when a split system gives me some protection from having a single point of failure?

I did the auto update and I got the admin console does not match the firmware error. Cleared Java files and downloaded the start.jnlp file again and retrieved the admin console directly from Polisy but it did not help. I also did sudo pkg update && sudo pkg upgrade and rebooted manually multiple times but can only access using the (cloud) option of the launcher.

The good news is my Z-Wave Sensative door and window strip is reporting properly now!

1 minute ago, upstatemike said:

So now it gets to the point to ask what ISY on Polisy can do that ISY994 plus Polisy cannot. What is my incentive to move anytime soon when a split system gives me some protection from having a single point of failure?

At the moment, and from functionality perspective, not much till your PLM dies. And, since I know you don't care about non-functional things such as security, I will not list them.

With kind regards,
Michel

@tazman,

You must use the ISY Launcher. If not, you need to clear cache and then use either:

https://<your polisy ip>:8443/admin.jnlp or 

https://isy.universal-devices.com/polisy/5.3.0/admin.jnlp 

With kind regards,
Michel

12 minutes ago, Michel Kohanim said:

At the moment, and from functionality perspective, not much till your PLM dies. And, since I know you don't care about non-functional things such as security, I will not list them.

With kind regards,
Michel

The only security standard I care about is NSTISSAM TEMPEST/1-92. Anything less than that is a waste of time.

26 minutes ago, Michel Kohanim said:

You must use the ISY Launcher. If not, you need to clear cache and then use either:

https://<your polisy ip>:8443/admin.jnlp or 

https://isy.universald-devices.com/polisy/5.3.0/admin.jnlp 

 

I got the same mismatch between admin console version and firmware as @tazman when using:

     https://<your polisy ip>:8443/admin.jnlp 

But things matched up and worked for me when using:  

    https://isy.universal-devices.com/polisy/5.3.0/admin.jnlp  (though I had to remove the "d" from "universald").

Edited December 30, 20214 yr by dwengrovitz

21 minutes ago, upstatemike said:

So now it gets to the point to ask what ISY on Polisy can do that ISY994 plus Polisy cannot. What is my incentive to move anytime soon when a split system gives me some protection from having a single point of failure?

Lack of devices (connectors, cables, routers, switches, power supplies) between your NSs and ISY programs.

Edited December 30, 20214 yr by larryllix

@dwengrovitz,

You need to clear the cache.

With kind regards,
Michel

5 minutes ago, dwengrovitz said:

 

I got the same mismatch between admin console version and firmware as @tazman when using:

     https://<your polisy ip>:8443/admin.jnlp 

But things matched up and worked for me when using:  

    https://isy.universal-devices.com/polisy/5.3.0/admin.jnlp  (though I had to remove the "d" from "universald").

@Michel Kohanim the link downloads the admin console from Polisy and works but using the launcher (https://isy.universal-devices.com/start.jnlp) does not work for local access.

2 minutes ago, Michel Kohanim said:

You need to clear the cache.

Tried that multiple times, but it didn't work for me. 

@tazman,

Java cache works in mysterious ways. If you ever used the direct link before, the jar file is cached and start.jnlp will use the cache. That's why I mentioned that you need to clear Java cache  if you have use anything but the Launcher before.

With kind regards,
Michel

4 minutes ago, Michel Kohanim said:

@dwengrovitz,

You need to clear the cache.

With kind regards,
Michel

For some reason clearing Java cache does not work.

3 minutes ago, dwengrovitz said:

Tried that multiple times, but it didn't work for me. 

Might be a bug. Will review next year.

With kind regards,
Michel

4 minutes ago, Michel Kohanim said:

Might be a bug. Will review next year.

With kind regards,
Michel

Yes take a well deserved brake! At least we have access and I will try my older Z-Wave locks tomorrow to see how well they work.

39 minutes ago, Michel Kohanim said:

@tazman,

You must use the ISY Launcher. If not, you need to clear cache and then use either:

https://<your polisy ip>:8443/admin.jnlp or 

https://isy.universald-devices.com/polisy/5.3.0/admin.jnlp 

With kind regards,
Michel

Cleared the Java cache and I'm getting the same error as @tazman when using the ISY launcher. 

When do you think Z-wave migration will be available?

When migrating from the ISY to the Polisy does the ISY still retain its functionality other than the Portal access?

35 minutes ago, Michel Kohanim said:

@tazman,

Java cache works in mysterious ways. If you ever used the direct link before, the jar file is cached and start.jnlp will use the cache. That's why I mentioned that you need to clear Java cache  if you have use anything but the Launcher before.

With kind regards,
Michel

@Michel Kohanim just a data point I had the same mismatch error when selecting LAN in the Launcher.

However, selecting Cloud in the Launcher and the Admin console launches properly.

12 minutes ago, Techman said:

Cleared the Java cache and I'm getting the same error as @tazman when using the ISY launcher. 

When do you think Z-wave migration will be available?

When migrating from the ISY to the Polisy does the ISY still retain its functionality other than the Portal access?

@Techman I had the same error when I selected LAN in the Launcher.  I'm not sure if you have a Cloud option but the Launcher worked fine with that option.

All, it should be fixed. Please click the button on the front once. Clear cache, use the Launcher. 

Z-Wave migration will not happen soon as we have to do S2 and Certification.

With kind regards,
Michel

I have a Polisy on its way.

I also ordered an Insteon 2448A7 USB stick (because of no availability of PLM) and have a Zooz z-wave stick. The Insteon stick should work fine based on what others say because as long as I have wireless Insteon devices they will bridge powerline to my older ones. I also have only around 200 Insteon links (the USB stick is half the links around 1000 than the 2000 or so on PLM).

Can't wait to try.

 

 

 

 

 

Edited December 31, 20214 yr by brians

30 minutes ago, Michel Kohanim said:

All, it should be fixed. Please click the button on the front once. Clear cache, use the Launcher. 

Z-Wave migration will not happen soon as we have to do S2 and Certification.

With kind regards,
Michel

I can confirm it worked for me now thanks Michel!