Everything posted by Techman
-
Zooz ZSE70 motion detector not working with Eisy Zwave add-on
Yes you need to take it down and bring it next to your admin console. When you press the set button 1 time it will wake up the sensor for 10 seconds, then you need to quickly write the new config parameters while the sensor is awake.
-
Zooz ZSE70 motion detector not working with Eisy Zwave add-on
To reduce its range you have to set the MS senistivity (parameter 1) to a lower number, somewhere between 1 and 5. The default setting is 6. In the configuration setting insert 1 for the parameter number, and a value between 1 and 5 for the Parameter Value. and 1 Byte, then click on set configuration. The Sensor must be in the linking mode before you press Set Configuration.
-
IoX fails to initialize after firmware update.
@technoroom The PLM only supports Insteon and has no relationship with Zwave.
-
Zooz ZSE70 motion detector not working with Eisy Zwave add-on
@DJonas Glad to hear you got your issue resolved. How do you like the ZSE70, I was thinking of picking a few up to replace some of my Insteon MS. Are there any issues with the MS beta firmware?
-
Eisy infinite loop
There's no option to roll back the firmware. You can try removng power for a minute, then boot up.
-
IoX fails to initialize after firmware update.
Others are also having issues with the latest update, 5.8.4_1. It's best to wait for a bug fix.
-
Eisy Constant Online Drops
There's an issue with 5.8.4_1. It's best to open a support ticket
-
Upgrade from 5.8.4 to 5.8.4.1 Issues
There appears to be an issue with 5.8.4_1. You should open a support ticket
-
Can't send X10, admin console not allowing some menu choices
It might be a Java issue. Try clearing your Java cache, be sure to check all 3 boxes, then download the current IoX Launcher from here: https://isy.universal-devices.com/start.jnlp Nor sure where the 5.8.4_1 came from unless it was just released on the day you updated. My system is current and only shows 5.8.4 Are you on Windows or Mac? PG3x 3.2.27 is the current version.
-
Can't send X10, admin console not allowing some menu choices
I think UDX was updated to 3.6.2.7. Not sure what the prior version was. You can check your current version using this link (assuming your on an eisy). Let me know if you have a different version. eisy.local:8443/WEB/sysconfig.txt
-
5.34 keeps crashing
@Bill Morrow Post a copy of your ISY error log
-
Zooz ZSE70 motion detector not working with Eisy Zwave add-on
The EISY is the HUB. The Zmatter board which is part of the HUB supports the Zwave mesh network As I mentioned earlier, the ZSE70 is currently using beta firmware, so it's possible that it may not be fully functional until the final firmware is released. The Zooz products and the Zmatter board along with the EISY are all quality products. You can try bringing the ZSE70 closer to the EISY, if it then works you'll need to add a repeater to extend its range.
-
Zooz ZSE70 motion detector not working with Eisy Zwave add-on
I corrected the link, try again. Zwave is a mesh network, just as Insteon is. The zwave signal, in a zwave mesh network, gets repeated by other non-battery Zwave devices Zwave LR does not use the Zwave mesh network. The device communicates directly with the hub. When you install a zwave LR capable device it should give you the option of either installing it as LR or as part of the Zwave mesh network Depending on how far your ZSE70 is located from the eisy, and how may walls the signal have to go through, would determine if you need a repeater. Any plug in Zwave device acts as a repeater. The ZAC38 would be a good choice, I have one in my network.
-
Zooz ZSE70 motion detector not working with Eisy Zwave add-on
Yes, the Zmatter board is Zwave LR certified, but I don't think the current eisy firmware supports LR. If it did then when you add a Zwave LR device it should give you the option of adding it as either LR or as part of the Zwave mesh network. Take a look at this article: https://www.thesmartesthouse.com/blogs/the-smartest-blog/all-about-z-wave-long-range
-
Zooz ZSE70 motion detector not working with Eisy Zwave add-on
The ZSE70 is currently running beta firmware. You should occasionally check their support site for the final firmware update which has not yet been released. The LR is not yet supported on the eisy so it's possible that you may need a Zwave repeater between the eisy and the ZSE70 I've had good results with the EISY and Zooz product compatibilty.
-
Please help me migrate to eisy
@BobM99 You should use the USB PLM, the instructions for switching PLMs are in the migration info I sent you.
-
Please help me migrate to eisy
The complete migration instructions can be found at this link: https://wiki.universal-devices.com/Eisy:User_Guide#Migration Be sure to follow the migration guide exactly.
-
August Smart Lock with ZWave to eisy ZMatter
@JimTurner I just edited my previous post, take a look.
-
August Smart Lock with ZWave to eisy ZMatter
@JimTurner To use the Zwave lock with the eisy, which was previously installed on the ISY994, you must first exclude it from the ISY and then incllude in the eisy. A zwave device can only be linked to one controller. When you set up the eisy did you use the Migration option to move your programs and devices to the eisy? There's no logical reason to have to use two controllers. You should be able to disconnect the ISY994 if the eisy was properly setup.
-
August Smart Lock with ZWave to eisy ZMatter
A couple of things you can try: Exclude the smartlock from the eisy and then factory reset it. Bring the lock close to the eisy and then include it. When you included the lock did you use S2 security, which may have an effect on the range. Does the lock use the 500, 700 or 800 series zwave chip? How far is the final location of the lock from the eisy? Do you have any a/c powered zwave devices located between the final location of the lock and the eisy?
-
Error when I start IoX
Are you on a MAC or a PC? Whis are your ISY/POLISY/EISY and UI firmware versions?
-
Bad SD card - ISY 994
If your able to access the ISY from the cloud then your issue is probably with the IoX Launcher. Clear your Java cache, be sure to check all 3 boxes, the download the IoX Launcher from here: https://isy.universal-devices.com/start.jnlp This will place a new Launcher icon on your desktop. Let me know if this works
- Weatherflow node server
-
Weatherflow node server
@bpwwer What are the LONG POLL and SHORT POLL parameters used for? Are their values in seconds or ? I would like to slow down the data coming from the node server. I think the large amount of data coming from my hub may be interferring with some of my programs by filling up my buffers on the eisy.
-
ISY994 5.4.1 and Zwave Plus LR
The ISY994 Zwave dongle has an effective range of about 20 feet. If your Zwave switch is further away you should add a Zwave repeater between the ISY and your device.