Javi

Is it just the nodes related to this node server? If not are the nodes affected only Node Servers?

Please test the local connection in Settings Tab > Systems > your System > Local Connectionnection Settings (expanded) > Test Local Connection Button. Please post a screenshot if you get any error messages in Test Local Connection.

@dbwarner5, replicated and fixed for the next update...will try to release by end of day.

Hi All, We have some users reporting connection issues with Portal, we are looking into the issue. If you are on the same network as eisy local connections should work. https://wiki.universal-devices.com/index.php?title=UD_Mobile#Combine_Local_and_Remote_Connections

Does the same happen with a remote connection with Admin Console?

UD Mobile thinks you are tapping "My Geofences" which is on the same screen. If you tap "My Geofences" you will get the same screen. I cannot replicate the issue, and could not find a reason this would happen, as all items on this screen are static (don't change) so the index would never change which makes it unlikely the tap index is incorrect due to race (tap/refresh). I know this may sound unlikely but, if you are right handed and are using your thumb, your thumb would pass directly above "My Geofences". It is possible the phone is reading a tap at this location for some reason. Maybe the screen is dirty, maybe thumb is too close. The tiles on the screen with "My Devices" will flash blue briefly when they are clicked, when this happens do you see the press indication? Edit: I tested on UD Mobile iOS 1.1.60, so if not using the same version try upgrade.

It's possible it is UDM or Portal as Favorites was recently rebuilt. Do you see any error messages. Does the device work correctly from the Device's Dashboard? Also please verify on 1.1.60 if using iOS

Please open a ticket and include your UUID. In addition to the UUID let us know if synchronization succeeds or fails when connection type is Portal (phone's wifi disabled).

I can not replicate this behavior. Does the Device's Dashboard show a value for High Temperature?

Should be live now, please let me know if there are any other issues.

No need to recreate unless they have been deleted, it's just a lookup error. The UDM wals looking for the node's default display status instead of the favorites defined display status which results in an error.

There was a bug discovered with favorites in version1.1.59, so 1.1.60 is awaiting apples approval.

App setup and configuration is not yet ready for Android, we are working on the required changes, so hopefully within the next few weeks.

Thanks for the report, I'm building 1.1.60 now, so just need to await Apple's processing/approval. Issue caused by architecture changes. A display node is now a group of nodes, although only one is shown to the user in the Favorites Editor.

If using Occupancy V2 there is no need for programs or variables see the link above for instructions https://wiki.universal-devices.com/index.php?title=UD_Mobile#Occupancy_v2.0_Node_Server

Try reboot eisy, then synchronize UDM.

I think it would be closer to $300 unless you need 2 controllers in different locations (~$200 (controller with power ethernet) + (2 x expansion ~$50 each). Would be hard to find another 24 (or 40 in this case) zone controller for less.

Is the same shown in the Admin Console?

I've used OpenSprinkler for years, and am the author of the same Plugin. OpenSprinkler works great for the most part, and much better than non-connected controller. It has fallen off the WiFi network a few times in the last 5 years (like many WiFi devices) but the programs are local so they still run, just needed to restart and it would reconnect. So I would recommend getting the ethernet adapter if that is an option in the controllers location. There are no "hacks" needed to connect to eisy and no cloud service. eisy will act as the remote access so no need to open/forward ports or have a static IP or Dynamic DNS service.

@JMcKain, We need a additional information. Please open a ticket and include eisy's UUID, and a link to this topic. Thanks

Looking into this.

It can be a program, but be sure the "Command" is executing the correct command. Commands are Run IF, Run Then, Run Else, and Enable (Enable enables or disables a program, it does not run the program). However if using the occupancy Node Server UD Mobile should update the node see https://wiki.universal-devices.com/index.php?title=UD_Mobile#Occupancy_v2.0_Node_Server Likely a programing issue. I would remove all variables and use the Occupancy Node as the trigger, see link above.

It is likely an invalid URL, be sure is starts with "https" and ends with "/desc". Local connection can also be used with the http:<ipAddress>:8080/desc where IP Address is replaced with the units local IP Address (i.e. something like 192.168.1.65).

Module purchase server for ISY994 was shutdown, so if a module was not installed prior to the module purchase deadline then it cannot be installed.

Replicated, UDM was not updated to match the new PG3 API for polls. Will try to get a fix in the next couple of versions.