dsstrainer Posted May 21, 2019 Posted May 21, 2019 (edited) So I followed this guide: https://wiki.universal-devices.com/index.php?title=ISY994i:INSTEON_Device:FanLinc-KPL_FanLinc_KeypadLinc_Configuration One change I would add is to set the "Light" to be toggle mode so that the "off" button lights up when off (if in non-toggle on then all buttons are off when not on) But everything else seemed to work great. Both controls from the KPL directly and from the ISY admin area are functioning as expected. However, one thing that does happen is when I control a fan scene from the admin like "KPLFan-Med" On.. it turns ALL 4 kpl button lights on. It does put the fanlinc into Medium speed, but I have to go back and manually turn off the button lights but clicking the physical "Med" button which does turn everything off except the "Med" button. *Note: I use "A" for off and "D" for high which is not the standard way many of you have.. but shouldn't be relevant for this issue. Did I miss anything? Edited May 21, 2019 by dsstrainer
Michel Kohanim Posted May 22, 2019 Posted May 22, 2019 @dsstrainer, 1. You should NOT use the button grouping 2. I suspect a step was missed here: Medium Scene Select the Medium Scene in the network tree Using the sliders in the panel, set the levels for each button and the FL - Motor for this scene Medium Button – 100 Fanlinc - Med All other buttons – 0 Select the Scene Controller button in the Medium scene. This entry will be red. Click on Copy Scene Attributes from Medium With kind regards, Michel
danncas Posted June 5, 2019 Posted June 5, 2019 Don't have one. Thinking of getting it for living room basic nutone. is it worth it. Can someone please tell me. Love to hear from you all
BJB2757 Posted October 9, 2020 Posted October 9, 2020 Does "copy scene attributes" exist in 5.3? I don't see it.
lilyoyo1 Posted October 9, 2020 Posted October 9, 2020 4 hours ago, BJB2757 said: Does "copy scene attributes" exist in 5.3? I don't see it. No. It was removed
BJB2757 Posted October 9, 2020 Posted October 9, 2020 OK thanks, good to know I’m not missing anything.Some other people have said that functionality is not consistent with all the different nodes that are now possible. But still it would be nice if at least you could copy scene attributes for Insteon, so we’d at least have the same functionality as before.Sent from my iPhone using Tapatalk
Recommended Posts