Michel Kohanim

Hi buffyandsneaky, Unfortunately not. With kind regards, Michel

Hi Waketech, Yes. Yes ... to reset: http://wiki.universal-devices.com/index ... the_Module No, irrigation requirement which also includes rain information. It means that your plants require 0.125" of water per cycle. You use Irrigation Requirement: http://wiki.universal-devices.com/index ... _If_Needed With kind regards, Michel

Hi Matt, Only certain firmware versions of INSTEON thermostats support setting time. And, you can use a program in ISY to set the time on those thermostats. With kind regards, Michel

Hi Guy, No, the problem you are having is related to status mismatch between what the IOLinc has reported and what it responds with after query. The only thing that would cause this is Trigger Reverse but your is not set. You might want to contact our tech support (links below) to further investigate what might be causing this issue. With kind regards, Michel

Hi junkycosmos, You do need the PLM that comes from SmartHome. It seems that you don't have that one. Please contact us (links below) and specifically request for a PLM to address All on. With kind regards, Michel

Hi Rob, Comments below. Many things have changed including UPnP disablement ... REST path is http://your.isy.ip.address/rest You need an application that uses REST to communicate with ISY. Where did you find this information? Z-Wave has a multi sensor. I am not aware of any for INSTEON No. With kind regards, Michel

Hello ejh3, Please submit a ticket (links below) and we'd be delighted to check and see what may be going on. With kind regards, Michel

Hello ejh3, It seems that ISY is not able to resolve DNS names to IPs. If you have configured your ISY with a static IP address, you might want to consider reverting to DHCP. With kind regards, Michel

Hello rvc, 1. Z-Wave is still beta and will remain beta till we get certified 2. We do not share anything with MobiLinc that's not been shared publicly and with other 3rd party developers 3. We do not know MobiLinc's software development plans 4. I asked Wes to post so that he would have a voice jmed999, We are pretty open to anyone interested in developing an Android app for ISY. With kind regards, Michel

Hi Mikes, Thank you ... we should be able to figure out the issue once we login to your system. With kind regards, Michel

Hi Mikes, If you are still having problems, please do not hesitate to submit a ticket (links below) and we would be delighted to help. With kind regards, Michel

Hello everyone, As mentioned before, we are investigating other Android alternatives and we would be delighted to help with this effort. If anyone has any ideas please do let us know. With kind regards, Michel

Hi Teken, If you are using personal stations, it's possible. If not, then no. You do not need to use locate. Just click on the Find button and then type winnipeg. With kind regards, Michel

Hi Teken, That station is no longer listed (and it's not reporting). Would you please use the Find button to try another? With kind regards, Michel

Hi Teken, what's your station id? With kind regards, Michel

Hi stillen_i30, Please make sure ISY is not in learning mode. Also, you can go to the IR tab and see IR events as they happen. With kind regards, Michel

Hi ferdies, http://wiki.universal-devices.com/index ... structions With kind regards, Michel

Hello pdxcav, Thanks so very much for the info. If the motion sensor sends a NACK, then ISY will report it. ISY does NOT try to query/read the thermostat unless in programming mode. With kind regards, Michel

Hi pjjameso Yes, you shouldn't have any problems. With kind regards, Michel

Hello Bxsteez, Unfortunately such list does not exist simply because ISY supports most high level command classes exceptions are: - Multi-Channel devices such as remote controls - Scenes Motion sensors should be supported. With kind regards, Michel

Hi Raj, As LeeG correctly noted, the instructions are in the Wiki: http://wiki.universal-devices.com/index ... _.28PLM.29 If you are still having problems, please do not hesitate to contact our support (links below). With kind regards, Michel

MexicanRadio, You would want to use Control and not Status. Programs based on Status are evaluated IF AND ONLY IF the status changes from its previous state. With Control, the programs are evaluated based on events generated by the device (i.e. the sensor is tripped, etc.). With kind regards, Michel

Hi MWareman, Thanks so very much for the details. Just to confirm that variable substitutions in network resources are definitely planned in 5.0. With kind regards, Michel

Hello apostolakisl, Barometer should be fixed by now. Please check again and let me know. The label was a huge task in and of itself. The problem is that the forecast is not really for today. It's for 7am till 7am next day and updated every hour so there's an overlap with forecast for tomorrow at some point after 12:00am today. This is how meteorologists decided what 24 hour forecast should mean. With kind regards, Michel

wrj0, Please send your station ID along with a link to this topic to support@universal-devices.com. With kind regards, Michel