Michel Kohanim

Hello naPS, Please use the OpenADR developer's guide included in 4.2.5 SDK: http://www.universal-devices.com/developers/wsdk/4.2.5/ISY-WSDK-4.2.5.zip With kind regards, Michel

Hi jam583, Have you looked at: http://wiki.universal-devices.com/index.php?title=ISY-99i_Series_INSTEON:Networking:Network_Resources#Sonos_by_jonathanud .... you can simply import the network resources and then just change the ip/port. With kind regards, Michel

Hi jmed999, I still haven't heard back from HAM ... I will follow up. With kind regards, MIchel

Hello MaddBomber83, I am so very sorry to hear. I am at that station right now and everything is being reported. Can you please send me your error log (support@universal-devices.com)? With kind regards, Michel

Hello all, I am so very sorry for the trouble. I have submitted a ticket to HAM (thanks to jmed999) and awaiting a response. I'll let you know as soon as I hear back. With kind regards, Michel

Hi jmed999, please send your station ID to support@universal-devices.com. With kind regards, Michel

Hi gmurch, please contact our tech support. With kind regards, Michel

Hello gmurch, Would you please contact our tech support? With kind regards, Michel

Michael, Thanks so very much! With kind regards,

Hello telljc, Unfortunately ISY does not work with those thermostats. i am not sure about ELK. If you have a Zigbee version of ISY (994iZ), then you can try RCS TZB45. If you have Z-Wave version, then almost all Z-Wave thermostats are supported. With kind regards, Michel

Hi jwagner010, If you are still having problem, please do not hesitate to contact our tech support (links below). With kind regards, Michel

Hi elite-rob, The reason is that in 4.2.4 and above, we disabled UPnP by default (security concerns). If you wish, you can go to Configuration | System and enable UPnP under Network Settings. With kind regards, Michel

Hi Teken, Got it. This said, I don't think the 5.0 will solve the issue since there needs to be a definite event that starts the cycle. Have you tried a SynchroLinc? With kind regards, Michel

Hi brausse, Please send your UUID (Help | About) to support@universal-devices.com. I am so very sorry for the inconvenience. With kind regards, Michel

Hi Teken, Are you also able to sense when those devices are turned on? i.e. from idle to first cycle? With kind regards, Michel

Hello pmarcos, Please do make sure that: 1. You have cleared all your Java cache 2. You use http://isy.universal-devices.com/994i/4.2.5/admin.jnlp to get to ISY 3. Upgrade to 4.2.5 If you are still having problems, please do not hesitate to contact our tech support (links below). With kind regards, Michel

Hi ryarber, I suppose it would be possible but I think it will take a lot of programming. With kind regards, Michel

Thank you all. Board Layout is almost done! Teken, yes, this PLM supports all INSTEON frequencies (of course there's a hardware configuration/chip that has to be replaced). With kind regards, Michel

NeilP, I must humbly submit to you that your PLM is dying. The reason is that ISY retries 3 times in a span of 20 seconds to try and connect to the PLM at boot up. So, if indeed it took the PLM more than 20 seconds to boot, then I am almost certain the PLM is on its way to heaven. This is especially the case when you had a power outage. With kind regards, Michel

Hi Guys, 1. Yes, dual band 2. No, unfortunately we do not have access to the firmware so not larger capacity for links With kind regards, Michel

Hello thedishking, This is absolutely not normal. Daylight saving should work. Can you tell me what's your location and whether or not you have Daylight Saving check box checked? With kind regards, Michel

Hi Teken, Currently, it's a rectangular box. With kind regards, Michel

Hi Guys, ISY has a switching power supply. It's totally up to you how you would like to have it powered. i.e. you can also plug your ISY to the power supply and thus it'll always be on. With kind regards, Michel

Hi Robert, You might want to check your error log for SMTP errors: http://wiki.universal-devices.com/index ... MTP_Errors With kind regards, Michel

Hi raymondh, Our goals have been: 1. To design the power circuitry so that it won't die after 2 years 2. Heat dissipation so that the unit does not overheat 3. Power ISY 4. NOT a wall wart The rest is pretty much identical to SmartHome's reference design and the firmware is theirs. With kind regards, Michel