Techman

@pwmcmaho When you replaced your PLM did you exactly follow the attached procedures? Is the PLM address, that's showing up in your PLM Status your new or previous PLM? Replace PLM Procedure (EISY or POLISY).pdf

Have you tried using the admin console rather than UD Mobile, and an ethernet connection between the eisy and your router

@Jimini Here are the migration instuctions for moving from an ISY994 to the EISY. It's probably best to do a factory reset on your EISY prior to the migration. If you're having trouble resetting the EISY try first rermoving power for about 15 seconds. Eisy:User Guide - Universal Devices, Inc. Wiki

We are thrilled to announce that we have received a limited batch of On/Off Keypads. These will sell out fast so pick yours up today. More units are arriving early February so if you missed this batch, hit the NOTIFY ME WHEN AVAILABLE button to get an email as soon as they arrive. This is our only product that can handle up to 20-amps with operating between 100 to 277 volts. It is the ideal product to control large, non-dimmable loads! On/Off Keypad (6-Button)

The admin console is not designed to run continiously, but it should stay connected for more than 10 minutes. It's possible that Java is shutting down, or something is interferring with java, which would close the admin console.

In addition to what @paulbates suggested, it's possible that your AV System is creating issues, you might want to put a powerline filter on it.

Do you see your EISY in your router Is DHCP enabled in your router If you have a firewall, try disabling it. You can also try removing power from your eisy for 15 seconds the boot it up Try rebooting your router. Post a screenshot after you run the IoX Launcher

When you cleared your java cache did you check all 3 boxes What is your EISY firmware and UI versions (in Help about) VPN should be off Is your EISY and Computer on the same network You mention that you can run the admin console from the local network, what are you trying to connect from that's giving you a problem??

Try removing it from your eisy then doing a factory reset on the sensor and a reinstall. Are you using the UDI ZMatter Module, if so are your antennas connected to the correct connector. If the issue still persists then you should probably open a support ticket with UDI https://www.universal-devices.com/my-tickets

@Chris K Take a look at your device tree, there should be additional nodes containg the data

I'm not sure of any of the other dual band devices indicate Insteon traffic. It's probably a trial and error process.

@someguy Take a look at these two articles regarding Insteon communication problems: INSTEON: Troubleshooting Communications Errors - Universal Devices, Inc. Wiki INSTEON Signal / Noise Troubleshooting - Universal Devices, Inc. Wiki

Your scene results show that the two devices passed the scene test. When you trigger the scene from the admin console turn on the scene not a device in the scene. If you turn on the light from the switch does the KPL button light? If you press the KPL button does the light turn on?

A lot of the wireless carriers are blocking SMS messages from non wireless devices due to spam issues. I gave uip on SMS and use push email.

@ThisIsTheWay Right click on the scene, then click on Diagnostics | Scene test Post a copy of the test results

@autoperformance Are your ISY994 firmware and UI the same version

Can you post a copy of your error log Whish ISP are you using for your mail server

I would assume that auto would detect if a Zwave/Zigbee controller is connected to the eisy "Off " would disable that function in the controller "On" would enable that function in the controller

@62vetteefp You most likely have a failing PLM, probably best to replace it with your new PLM. Be sure to exactely follow the replace PLM procedure, see attached file Replace PLM.pdf

@Darnok Take a look at this thread Upgraded to Mac OS15.2. Lost ability to open AC....FIXED - eisy - Universal Devices Forum

The 32Gb cards definitely work. I had one in my ISY994

@rayg From the UDI Wiki The ISY994i takes a MicroSD card. The max size is 32GB. Please look for a card with the newer A1 rating (A2 also works, but will fallback to A1 because the ISY994 does not provide hardware support required for A2).

Try rebooting the controller What are your UI and Firmware versions?

@creeble The red exclamation point to the left of a device means the PLM can't communicate with the device. It sounds like you have marginal communications between your ISY and your device(s), take a look at this troubleshooting link. https://wiki.universal-devices.com/INSTEON:_Troubleshooting_Communications_Errors

INSTEON Random All On Events - Universal Devices, Inc. Wiki also, if you have any MS their low battery condition can cause an all on event