DennisC

I started adding several items to my cart on the Smarthome website, along with the discount code. Something didn't look right with the discount and when I checked the math I found the discount was not being taken off the Insteon Motion Sensor II, item number 2844-222. I have an email out to Smarthome now, but if you order anything, you might want to check that the discount is being applied properly.

I would suggest you contact UDI, all you would need is to purchase the ZWave dongle and ZWave module and install it in your existing ISY.

If you are on an Android phone, Agave is a phone app you should check out. It is very well supported with new features being added all the time.

I think this would be the best you could hope for. Maybe have a program query it after power is turned on each night to insure communications so it will turn off on time? https://www.smarthome.com/insteon-2634-222-on-off-outdoor-module-dual-band.html?gclid=EAIaIQobChMIxuru8baN3gIVSiSGCh1Q3wQTEAQYASABEgKECfD_BwE

Could I suggest dating or adding a revision number to each version? This would enable us to make sure we are looking at the latest version. Thanks, Dennis

I have about 8 GRI sensors wired up to my Elk panel also. Very reliable and effective. I have received several early notifications from my system and was very great full for the warning.

I would suggest deleting the downloads and uninstall Java if it partially installed. Shutdown the computer completely and restart. After a cold restart, disable antivirus protection and re-download what you need .

There are two jnlp Java UI's. The Admin Console and the Dashboard. While I don't think I have ever seen a reboot option in the Admin Console, there is one in the Dashboard. Downloaded the correct version for your firmware and you will be able to reboot remotely. Dennis

https://forum.universal-devices.com/topic/22000-release-462-is-now-official/ The proper links are a bit down the page. Be sure to read the instructions.

NEMA rated outdoor enclosures come in different sizes. You could mount an outlet inside of one and use an approved connector to bring your plug in to the enclosure. You could also mount the I/O Linc inside and extend the wires to the location you need using an appropriate raceway.

You might want to try removing power to the switch for a good 1 minute and then doing a factory reset. You might find the switch can then be added back to the ISY.

Agave has features being added to it regularly. If you buy the all access pass you are finished for the life of the app. Whatever features are added will be included. So it's up to you.

I also have my garage door wired to my Elk. I use a wide gap contact for BA alarming and status to ISY. I then wired my garage door opener to a spare Elk rely for open/close control.

I agree, Agave is the way to go if you plan on doing a lot remotely. If your usage is occasionally, I would start with UD Ajax interface.

Once Excel opens you should see a dialog box asking if you want to either open or run (I think it says macro??), not sure of exact wording and I am not by a computer. Say yes and the file should open. If you are not seeing the dialog you may be blocking this from running and need to check Excel settings.

If distance is not too great, I think I would try a CAO wireless tag for this project. At first glance, the Reed KumoSensor might work. https://store.wirelesstag.net/products/reed-kumosensor Dennis

I can give you some broad brush information on how I was able to accomplish this on my Win 10 setup. Not sure if there would be any differences on a Mac. Open Dashboard Open Network Select “Server Certificate” Complete Certificate Information Select “Cert. Request” Copy information Go to Certificate Authority (ex. Startssl.com) Request PEM SSL Certificate (ex. DV SSL Certificate) and paste request from ISY Save files, including intermediate certificate Unzip certificates from “Other File” Back to ISY From Certificate Information screen, select “Receive Cert.” Open certificate in text editor and copy content Paste in to ISY “Receive Cert.” box Select yes for loading Intermediate Certificate Import all 3 certificates in to ISY Save If successful, ISY will reboot The ISY will expect the certificate in PEM format (at least this is the only format that I was able to get working). Also, the one caveat here is, Startssl.com will want to verify your identity to create your free account. This is done by sending an email to your account domain name. If you are not set up to receive this email, you will need to arrange for email forwarding. Also, on the Startssl.com site, either when requesting the certificate or when you sign up, you need to select your domain and select add to move forward in the process. I don't remember which step this applied to. Dennis

I don't think there is going to be an API. You are sending 00 for off and 01 for on to the relays IP address. That's all the control you are going to have. Go to this page - https://www.amazon.com/SainSmart-Channels-Controller-Compatible-Connected/dp/B00NBGGCHK and head to the bottom of the page for some Q&A. Dennis

Michael is the expert, but I will take a crack at it until he can respond. Take another look at the Wiki, there are two screen shots right under that section. The screenshot on the left is for first connection. The screenshot on the right is for use with the portal. The second "Vars" is what you are interested in - %ISYURLExternal. The correct address is: https://user%40domain.com:password@my.isy.io. If you substitute your user name, domain, and password, does your entry look the same? Note the %40 after user and before domain name instead of the @ symbol. Regards, Dennis

I have to agree, be sure to use alarm type sensors wired directly to the Elk M1. I wouldn't trust Insteon or Zwave device for security. Once you add the Elk module to your ISY, you will be able to utilize all devices in programs and notifications.

Try posting a screenshot of your error a provide some information pertaining to when the error appears. Someone here should be able to help you.

I totally agree with the advice you have been given so far. My water shut valve is wired to my Elk M1 and I have deployed hard wired leak sensors also wired to the Elk system. You can not be too careful with critical systems.

Hot water heating loops usually have a flow control valve. You should be able to lengthen the time it takes the heater to satisfy the thermostat by adjusting the water flow.

I'm using a Honeywell Zwave thermostat number TH8320ZW. I have not had any problems with it. I have all programing (time based temperature changes) done by the ISY. Dennis

I think it is a little odd that any of the zones are programmed on a new board. All you need to do is log in with Elk RP software and disable any active zone(s). One thing worth mentioning and I suggest you verify this in the manual, but I think a resistor is required on the siren output if you don't have one connected to the proper terminals. If not, the panel (I think) stays in trouble. Dennis