DennisC

No my lock is not.

Have you checked your error log to see what else maybe going on? I have a Schlage zwave door lock and utilize an Aeotec repeater without an issue.

Here is some troubleshooting guides from the Wiki, try going down the list: https://wiki.universal-devices.com/index.php?title=Troubleshooting_Help

If you have Have correctly installed as @MrBillsuggested, then it's most likely a firewall issue. Look in the Wiki here: https://wiki.universal-devices.com/index.php?title=Main_Page#Admin_Console_Closes_Automatically

@Jimbois currently working on an Elk Nodeserver. It is currently undergoing testing. I am not sure if he is ready to open it up to additional tester yet. What I can tell is if you have an Elk, it will be worth the wait.

Here is the link:

Have you added any new electronics around that time frame? It wouldn't hurt to power down the ISY, factory reset the devices and try again. Use the add method that requires you to type in the Insteon ID.

What firmware version are you running? Make sure your firmware and UI match or better yet, be sure to use ISY Launcher.

Yes, and you also get the Network Module included. The portal will also allow easier connection from apps to your ISY without having to port forward.

You would need a subscription to the UD portal. Here is some information: https://wiki.universal-devices.com/index.php?title=ISY_Portal_Installation_Instructions

You can also use one of the ISY apps (UD Mobile, Agave, Mobilinc) for lighting control instead of the Insteon apps. This will allow for more interaction when wanted with all ISY nodes.

That's good for now, thank you.

Javier, You have nested icons that can be used for folders and nodes. Do you have a listing of what icons are available? It takes a while to look through all of them without knowing exactly what is available.

Out of curiosity, does your firmware and UI match? Are you using the ISY Launcher?

See factory reset: https://wiki.universal-devices.com/index.php?title=Resetting_Your_ISY

For starters, are you using a 994i ISY? If you are on a previous version of ISY none of the current stuff is supported, as it is end of life. Do you know what firmware version you are running now? How do you normal access your ISY? Is it from ISY Launcher? If you are using ISY Launcher, then when you click on your ISY it lets you choose to load Dashboard or Admin Console. If you are accessing it from a IP address go to Help - About from the menu. If you are accessing from the portal, go to Select Tools - ISY Web Access then Help - About. Once we know your firmware version, we can give you more instructions. To use UD Mobile app you need to be running v5 firmware. If you are still on v4 firmware, updating to v5 takes a bit of prep time and some verification time after the upgrade. However, there is another app from the same author called Go2ISY which will run on v4 firmware. Also, you should be using the ISY Launcher to access your ISY. The Launcher will select the correct UI so you don't need to worry about updating the admin console part, which really is UI related. To use the Launcher go to the upgrade post for your firmware version and follow instructions to download and install Launcher.

Try right clicking the device and look in the menu for something "neighbors". This will update the association.

When was the last time you did a hard reboot of the device running your nodeserver? If it's been awhile maybe try rebooting it by powering it down.

Sorry, I'm out of suggestions.

Within the last two months I had an issue requiring me to contact UD for help with the error log. I had some 140005 Net Module Rule : x errors and I was told that was referring to my coresponding Network Resource. In my case, the Network Resource was also working, however, maybe it was returning a failed responded before succeeding, or something else. But I did confirm it was coming from the Network Resource. So, I am speculating that the same thing may be happening in this case.

I would suggest disabling that resource for a short period and see if it disappears.

Maybe you should open a support ticket with Wes at Mobilinc to see if he can offer any insights, or at least tag him with @ naming convention.

I think but I am not positive, that Net Module Rule 4 refers to Network Resource #4.

For starters here is a link to the ISY error log: https://wiki.universal-devices.com/index.php?title=ISY-99i/ISY-26_INSTEON:Errors_And_Error_Messages

I would suggest using @ notification system to bring UD's attention to your request. You can type "@" symbol,then start typing Michel's name and when it appears, select it from the list. This will notify him to read this post.