Chris Jahn Posted March 7, 2023 Posted March 7, 2023 For Z-Wave Smoke Alarms, CO, CO2, Water Valve that are not reporting properly, do either: 1) right+click "Z-Wave | Synchronize | Update" - OR - 2) Remove / Add the device again 2
brians Posted March 7, 2023 Posted March 7, 2023 (edited) Ooh, doing now Very excited about new i3 support! Edited March 7, 2023 by brians
gviliunas Posted March 7, 2023 Posted March 7, 2023 Upgraded easily and successfully to V5.5.9 from v5.5.7. No issues! Thank you to the UDI team for all their hard work. 3
mmb Posted March 7, 2023 Posted March 7, 2023 (edited) I wish they would get the beep messaging corrected. Is it 4 beeps, 4+1 beeps, but I count 5+1... Easy update, working perfectly, zero issues. Edited March 8, 2023 by mmb 1
brians Posted March 8, 2023 Posted March 8, 2023 (edited) Everything is working, had to clear java cache. Good thing Java didn't really take off and we are not running many java apps.... would suck to have to re-install ALL java applets each time clearing cache so IoX launcher works Edited March 8, 2023 by brians
Techman Posted March 8, 2023 Posted March 8, 2023 First Alert ZCombo is now correctly displaying status, thanks Chris. 1
Steve L Posted March 8, 2023 Posted March 8, 2023 4 minutes ago, brians said: Where is link to download proper version? https://isy.universal-devices.com/start.jnlp I saved a copy of this and rerun it as needed. You may have to clear your Java cache first. 1
Techman Posted March 8, 2023 Posted March 8, 2023 (edited) 5 minutes ago, brians said: I get error that admin console is not correct version if I choose LAN. If I choose cloud it is fine. Where is link to download proper version? Same link as prior versions. https://isy.universal-devices.com/start.jnlp Edited March 8, 2023 by Techman 1
Bumbershoot Posted March 8, 2023 Posted March 8, 2023 (edited) 1 hour ago, brians said: Very excited about new i3 support! My i3 Dial doesn't send updates to the AC when the state is changed manually, but it does update appropriately when the state is changed in the AC. The release notes indicated "initial support". It's not all the way there yet. EDIT: Nothing appears in the Event Viewer when the device state is manually changed. I choose to understand that "initial support" indicates that it's likely that these switches are now safe to purchase. 🙃 Edited March 8, 2023 by Bumbershoot 1
brians Posted March 8, 2023 Posted March 8, 2023 15 minutes ago, Bumbershoot said: My i3 Dial doesn't send updates to the AC when the state is changed manually, but it does update appropriately when the state is changed in the AC. The release notes indicated "initial support". It's not all the way there yet. EDIT: Nothing appears in the Event Viewer when the device state is manually changed. I choose to understand that "initial support" indicates that it's likely that these switches are now safe to purchase. 🙃 Oh ok, so no change really from before. I will hold off ordering one then, I was interested in the i3 dial but don't really need at this time.
TSinclair Posted March 8, 2023 Posted March 8, 2023 Update seemed to go fine. Oddly, my backup timed out prior to starting the update. I searched on here and found I needed to adjust Java a Parameter and that solved it. I do now get this error:
larryllix Posted March 8, 2023 Posted March 8, 2023 (edited) Update went fine, however none fo the existing non-Zwave bugs have been fixed for the last three years. Previous report Previous previous report Edited March 8, 2023 by larryllix 1
mbking Posted March 8, 2023 Posted March 8, 2023 Successful upgrade from IoX 5.5.6 to IoX 5.5.9 on Polisy. Also upgraded PG3 3.1.17 to 3.1.18. Upgrade was initiated from the AC. The only thing different this time was the absence of the 5 beeps at the end of the update. I followed the basic instructions listed with the upgrade except for power cycling Polisy. Mine is not easy to get to at the moment. If you reboot from the AC, is it necessary to also power cycle Polisy?
Geddy Posted March 8, 2023 Posted March 8, 2023 24 minutes ago, mbking said: If you reboot from the AC, is it necessary to also power cycle Polisy? I've been told it does accomplish the same thing. Now, I can't verify this for this update since there is some groundwork for future changes to PG3x for the Polisy. But I think if you've successfully updated and things are back as expected then you should be okay. If you notice admin console, PG3, or node servers not loading then perhaps a full power cycle might be needed. 1
DennisC Posted March 8, 2023 Posted March 8, 2023 My update to v5.5.9 on eisy went well, as far as the update goes. However, after 3 "update packages" one "reboot" and one "power cycle", I am still receiving the Update Packages messages. Just added the info to my existing support ticket about this issue. 2
larryllix Posted March 8, 2023 Posted March 8, 2023 16 hours ago, mmb said: I wish they would get the beep messaging corrected. Is it 4 beeps, 4+1 beeps, but I count 5+1... Easy update, working perfectly, zero issues. Yup..very iriitating 1
wrj0 Posted March 8, 2023 Posted March 8, 2023 Updated an eisy and a Polisy at another location and rebooted both without issues. Had to restart PG3 to get weather Node Servers to update their online status. Great work by UDI.
BamBamF16 Posted March 8, 2023 Posted March 8, 2023 Upgraded from 5.5.5 to 5.5.9. PG3 should have upgraded from 3.17 to 3.18 but I don't know if it did. PG3 has not come back since. Used AC to update. Got all the beeps. Have not been able to log in since. Can't even find PG3. I can SSH to policy just fine. Any thoughts?
DennisC Posted March 8, 2023 Posted March 8, 2023 1 minute ago, BamBamF16 said: Upgraded from 5.5.5 to 5.5.9. PG3 should have upgraded from 3.17 to 3.18 but I don't know if it did. PG3 has not come back since. Used AC to update. Got all the beeps. Have not been able to log in since. Can't even find PG3. I can SSH to policy just fine. Any thoughts? First, try a safety reboot and if that doesn't work, try a safety shutdown, followed by removing power for several minutes. Here is the info from the wiki on the multi-function button. Multi Function Button There's a little multi function button behind the very small hole on the front of the unit. This button has multiple purposes outlined below. Every click on the button will cause the unit to beep. If the button does not behave as described below, please update Polisy. Update and Upgrade All the Packages Click the button once. Please consult support before updating this route. See link below for suggested update/upgrade process. Please see this important update (July 2022) Safely Reboot Click the button twice. Safely Shutdown Click the button three times.
glarsen Posted March 8, 2023 Posted March 8, 2023 Updated to 5.5.9 with no issues on eisy with pg3x 3.1.22. The "Update Packages" message seems to have gone. 1
auger66 Posted March 8, 2023 Posted March 8, 2023 On 3/7/2023 at 6:20 PM, brians said: Ooh, doing now Very excited about new i3 support! I'm glad to see UD working on this, too. But Insteon--meet the new boss, same as the old boss. What is initial support? Although support is almost complete, but due to lack of documentation, the following is not yet working:
stevesreed Posted March 9, 2023 Posted March 9, 2023 5.5.9 fixes the issue of my GoControl / Linear GD00Z-4 Z-Wave Garage Door Opener Controller not providing status from it's Barrier Alarm node. After running an "Update with Interview" on the node, my programs now have access to all the status states from the Barrier Alarm, including "Low battery warning", which is the one I was most interested in. 1
Geddy Posted March 9, 2023 Posted March 9, 2023 1 hour ago, auger66 said: I'm glad to see UD working on this, too. But Insteon--meet the new boss, same as the old boss. If you’re going to quote the release maybe post the WHOLE release…or at least the important part after what you seem to take issue with… Quote We are working with insteon.com on getting these minor issues resolved ASAP. I’d say that UDI even adding/acknowledging that some of the i3 support is available is a big step, and saying they are actively WORKING with Insteon is an even bigger step. Considering the focus of recent updates was squashing bugs the process to introduce the initial support for a brand new (to the wide public) product is HUGE! So don’t throw shade without acknowledging the line following your quote. Would you have rather waited for UDI to comment on i3 support until it was fully implemented? We already have posts here asking if i3 will work with eisy/Polisy, heck even some hoping it will show up on the “ancient” <grin> ISY994. I think this release addresses those questions perfectly. It’s in the works, they’re working with Insteon to have full support. And for those 994 users that want to add i3 now know they will need to upgrade to have support. No more questions and wishful thinking. Well done UDI! Thank you for addressing the i3 support question! 4
kzboray Posted March 9, 2023 Posted March 9, 2023 Upgraded two Polisy's today one starting from 5.4.4 and the other from 5.5.7. Both system's upgraded without issue. The 5.4.4 took about five minutes. Don't rush these box's when they are upgrading, let them beep at you when they are done, don't start poking at them until then. The 5.5.7 took less than a minute. Neither system uses any z-wave, strictly Insteon, with five and twelve NS's respectively. 2
Recommended Posts