Michel Kohanim

Hi Teken, That station is no longer listed (and it's not reporting). Would you please use the Find button to try another? With kind regards, Michel

Hi Teken, what's your station id? With kind regards, Michel

Hi stillen_i30, Please make sure ISY is not in learning mode. Also, you can go to the IR tab and see IR events as they happen. With kind regards, Michel

Hi ferdies, http://wiki.universal-devices.com/index ... structions With kind regards, Michel

Hello pdxcav, Thanks so very much for the info. If the motion sensor sends a NACK, then ISY will report it. ISY does NOT try to query/read the thermostat unless in programming mode. With kind regards, Michel

Hi pjjameso Yes, you shouldn't have any problems. With kind regards, Michel

Hello Bxsteez, Unfortunately such list does not exist simply because ISY supports most high level command classes exceptions are: - Multi-Channel devices such as remote controls - Scenes Motion sensors should be supported. With kind regards, Michel

Hi Raj, As LeeG correctly noted, the instructions are in the Wiki: http://wiki.universal-devices.com/index ... _.28PLM.29 If you are still having problems, please do not hesitate to contact our support (links below). With kind regards, Michel

MexicanRadio, You would want to use Control and not Status. Programs based on Status are evaluated IF AND ONLY IF the status changes from its previous state. With Control, the programs are evaluated based on events generated by the device (i.e. the sensor is tripped, etc.). With kind regards, Michel

Hi MWareman, Thanks so very much for the details. Just to confirm that variable substitutions in network resources are definitely planned in 5.0. With kind regards, Michel

Hello apostolakisl, Barometer should be fixed by now. Please check again and let me know. The label was a huge task in and of itself. The problem is that the forecast is not really for today. It's for 7am till 7am next day and updated every hour so there's an overlap with forecast for tomorrow at some point after 12:00am today. This is how meteorologists decided what 24 hour forecast should mean. With kind regards, Michel

wrj0, Please send your station ID along with a link to this topic to support@universal-devices.com. With kind regards, Michel

Hello jmed999, This is basically forecast for today which is updated every hour. It's usually from 7:00 AM for the day. There are there concepts Coverage ... things such as chance of, isolated, etc. Intensity ... the intensity of the next condition such as heavy Condition ... such as rain, snow, etc. You can see a list for all of these under programs. Yes. The available listings is under Coverage in programs Please send your station ID to support@universal-devices.com With kind regards, Michel

Hi jmed999, Unfortunately not. This said, we shall explore some alternatives. With kind regards, Michel

jmed999, Thanks so very much for all the details which were 100% accurate. We still need to update the Wiki. With kind regards, Michel

Hi gviliunas, This is a special PLM firmware and not one sold through SmartHome. If you don't have it, please contact support@universal-devices.com and we'll arrange it for you. With kind regards, Michel

Hello jrd, Please do make sure you have 4.2.3 installed AND that your UI is 4.2.3 (Help | About). Here's the link to 4.2.3: viewtopic.php?f=25&t=14926 With kind regards, Michel

Hello smokegrub, Please submit a ticket (links below) and we would be delighted to remote in and figure it out. With kind regards, Michel

Hello smokegrub, No, the firmware should not matter. As long as you have 3.3.10 and below, we have done everything in our power to make sure the new Admin Console versions are backward compatible. Can you access your remote ISY by typing its URL in a browser? With kind regards, Michel

Hi Rick, If you are still having problems please do not hesitate to contact our tech support team (links below) and we'd be delighted to help you out. With kind regards, Michel

Hi remedy1234, Please contact our support (links below) so that we can hook you up with our SmartHome reps for an updated version of PLM for you which specifically addresses the All on issue. With kind regards, Michel

Hi scottbasilius, Yes, but there's a bug which is fixed in 4.2.4 to be out hopefully by tomorrow. With kind regards, Michel

Hi Apogee50, Not the remotes but I am using an IOLinc: 1. The relay replaces the button on the wall 2. The sensor is attached to the garage door so that you would know when the door is left open Here's a good start: http://wiki.universal-devices.com/index ... e_Door_Kit With kind regards, Michel

Hi johnnyt, The only way we can figure out whether the issue is related to processing power or a simple timeout, it would be best to turn debugging on (telnet, DON) and then look at the error log. This way you can see all the requests that are hitting ISY including their IP addresses. We had a case last night where ISY was quite sluggish. It turned out that IRule was bombarding ISY with /rest/node requests (like 10 every second) but without having the correct credentials. With kind regards, Michel

Hi htjunkie, In order for us to better serve you, please do be kind enough to submit a ticket. With kind regards, Michel