Jump to content

Polyglot v3 (PG3x)

Polyglot v3 (PG3/PG3x) - Help, Support, and general discussion for individual Node Servers Plugins

NOTE: If you are using a Polisy please be sure to upgrade to PG3x if you are having plugin issues. Note that updating to PG3x will remove access to PG2.
Upgrade process outlined in the wiki: https://wiki.universal-devices.com/Polisy:User_Guide#Upgrading_to_PG3x
There is no "UNDO" for this process. Run backups before you proceed.

Forums

  1. PG3 - Non-Production Store

    Node Servers currently found in the PG3 "Non-Production Store"
    These are often new development releases, but also could be beta and update releases not yet put into production.
    If a Node Server has not been put into the Production Store then discuss it here. 

    271
    posts

  2. AcuRite

    Running on PG3 - A Node Server for retrieving AcuRite Access Remote data for AcuRite devices

    40
    posts

  3. AERISWeather

    Running on PG3 - Add AERISWeather service weather data to the ISY994

    63
    posts

  4. Airscape

    Running on PG3 - Airscape Node Server

    3
    posts

  5. Airthings-C

    Running on PG3 - Airthings Consumer Products

    224
    posts

  6. AmbientWeather

    Running on PG3 - Pull weather data from weather stations connected to Ambient Weather's ambientweather.net servers

    208
    posts

  7. AMINEM

    Running on PG3

    • No posts here yet

  8. AudioPlayer

    Running on PG3 - Simple AudioPlayer that sends audio files to the headphone jack on eisy. It comes with a default set of mp3 files (chimes, bells, etc.) but you can use your own as well. 

     

    227
    posts

  9. August

    Running on PG3 - This Poly provides an interface between August Connect and Polyglot v3 server. This is very rough polyglot, but does work to control one lock. Has only been tested on Polisy. The status will update based on the short Poll value. Experimental use at your own risk

    23
    posts

  10. Autelis

    Running on PG3 - Interfaces with an Autelis Pool Control device to allow IoX to access Jandy/Zodiac Aqualink pool controllers.

    3
    posts

  11. AVRemote

    Running on PG3 - Universal A/V remote control. Supported: nVidia Shield, LG TV, Tivo, Denon AVR, Onkyo AVR, ESP8266 IR, Chromecast.
    Note: This is a PG3 port of the PG2 NS written by firstone.

    73
    posts

  12. AVServer

    Running on PG3 - Generic A/V Node Server that supports unsolicited status responses from the devices. Currently supports Pioneer VSX-1021, Sony Bravia XBR-65X810C.

    5
    posts

  13. Backup

    Running on PG3 - Save and restore lighting type device status

    16
    posts

  14. BalboaSPA

    Running on PG3 - Control spa equipped with a Balboa BP system and a bwa™ Wi-Fi Module (50350)

    6
    posts

  15. Bambulab

    Running on PG3 - Monitor and control of Bambu Lab 3D printers

    1
    post

  16. BASAO

    Running on PG3 - Universal Devices Analog output Node Server. Using the Contemporary Controls BASpi-6u4r2ao control device or the Edge Device that is configured with six universal input, four relay outputs and two analog outputs, 0-10vdc or 4-20mA. These controllers sit on a raspberry pi and are WiFi/Ethernet IP reachable from your intranet (internal IP network). These controllers are fully BacNet compatible and can be brought into any BacNet system by manufacturers like Tridium, Automated Logic, Carrier full interoperability.

    1
    post

  17. BASGARAGE

    Running on PG3 - WiFi Controlled Garage door opener momentary push button duplicator, with optional local camera for up to six (6) doors.

    3
    posts

  18. BASIRRIGATION

    Running on PG3 - Universal Devices WiFi Controlled irrigation controller, with optional local camera for up to thirty six (36) irrigation Zones. It utilizes up to six (6) Contemporary Controls BASpi-6u6r or the BASpi-Edge-6u6r. Please see documentation.

    1
    post

  19. BASPIAO

    Running on PG3

    • No posts here yet

  20. BASPI6U6R

    Running on PG3

    • No posts here yet

  21. BASPOOL

    Running on PG3 - Universal Devices Wifi Ethernet Pool Controller using the Contemporary Controls BASpi-6u6r or the BASpi-Edge-6u6r control Devices. You can have up to (6) pools using this Node Server and it is a great fit for a conventional Time Clock controlled pool upgrades. Please see GitHub documentation for details on setup.

    2
    posts

  22. Blink

    Running on PG3 - Node Server to control Blink Camera System

    63
    posts

  23. BlueIris

    Running on PG3 - Blue Iris UDI ISY Polyglot v3 Node Server

    45
    posts

  24. Bluetooth

    Running on PG3

    24
    posts

  25. Bond

    Running on PG3 - Bond Node Server 

    221
    posts

  26. Camect

    Running on PG3 - Camect UDI Polyglot V3 Node Server

    25
    posts

  27. Caseta

    Running on PG3 - Integrate with Lutron's Caséta Wireless systems. Designed specifically to work with the Smart Bridge but should also work with Smart Bridge Pro and possibly RA2 Select. Supports Shades, Pico Remotes Dimmers, Switches, Plugs and Occupancy Sensors.

    76
    posts

  28. Climacell

    Running on PG3 - Add weather data from Tomorrow.io. Includes current conditions and daily forecasts

    59
    posts

  29. DavisWeather

    Running on PG3 - Pull weather data from Davis WeatherLink console uploads (Not WeatherLink Live)

    39
    posts

  30. Drop

    Running on PG3

    1
    post

  31. DSDTech-Relay

    Running on PG3 - DSD Tech USB Relay

    • No posts here yet

  32. DysonPureCool

    Running on PG3 - for DysonPureCool fan series 

    41
    posts

  33. Eagle-200

    Running on PG3 - Smart Home Energy Monitor. Monitor home electricity use.

    9
    posts

  34. Ecobee

    Running on PG3 - Ecobee Node Server

    264
    posts

  35. eISYIR

    Running on PG3 - Add IR receiver functionality to eISY/Polisy via Flirc IR receiver

    104
    posts

  36. ELK

    Running on PG3 - ELK Alarm System Node Server

    1k
    posts

  37. EnvisaLink-DSC

    Running on PG3 - EnvisaLink-DSC

    171
    posts

  38. EnvisaLink-HW

    Running on PG3 - Accesses Honeywell VISTA alarm panels via EnvisaLink EVL-3/4 and DUO adapters from EyezOn for ISY access to alarm functions and events.

    47
    posts

  39. eWeLink

    Running on PG3 - A Node Server for Controlling eWeLink Devices

    1
    post

  40. Flair

    Running on PG3 - Control Flair Vents and Puck 

    19
    posts

  41. FlumeWater

    Running on PG3 - FlumeWater Node Server

    132
    posts

  42. Govee

    Running on PG3 - Control Govee Wifi led strip

    53
    posts

  43. HarmonyHub

    Running on PG3 - Connect Harmony Hub's to the ISY994

    171
    posts

  44. Holidays

    Running on PG3 - Maintains list of holidays and vacations

    7
    posts

  45. HolidaysGoogle

    Running on PG3 - Holidays for ISY scheduling using Google Calendar

    73
    posts

  46. HoneywellHome

    Running on PG3 - A node server to integrate Honeywell Home thermostats into the UDI ISY.

    74
    posts

  47. Hubitat

    Running on PG3 - Hubitat Node Server

    34
    posts

  48. Hue

    Running on PG3 - Connect Phillips Hue Personal Wireless Lighting system to the ISY994.

    239
    posts

  49. HueEmulator

    Running on PG3 - Hue Emulator 

    94
    posts

  50. Hunter Douglas

    Running on PG3

    205
    posts

  51. HusqvarnaMower

    Running on PG3 - Husqvarna Mower: A node server for control of AutoMower
     

    1
    post

  52. iAquaLink

    Running on PG3 - Accesses the iAquaLink™ cloud service to allow the ISY to control Jandy® AquaLink® pool controllers and accessories.

    45
    posts

  53. IFTTT-Webhooks

    Running on PG3 - IFTTT Webhooks integration - https://ifttt.com/maker_webhooks 

    49
    posts

  54. Intesis

    Running on PG3 - Node Server for Intesis Heat Pump or A/C WMP interfaces

    1
    post

  55. iopool

    Running on PG3 - Interface with iopool public API to allow IoX to access iopool EcO pool monitors

    3
    posts

  56. iTach IR

    Running on PG3 - iTach IR - Node Server which accepts the entire codeset for devices from the Global Cache Control Tower Database.

    98
    posts

  57. Kaiterra

    Running on PG3 - Air Quality monitoring for Kaiterra Laser Egg or Sensedge devices.

    3
    posts

  58. Kasa (TP-Link)

    Running on PG3 - TP-Link Kasa Node Server

    519
    posts

  59. LiFX

    Running on PG3 - Add LIFX control to the ISY994

    126
    posts

  60. Linez

    Running on PG3 - The Linez Power Monitors were produced by the now defunct JLM Energy based in Rocklin California and were used, 1 per panel, mostly in residential, to monitor building, solar and grid usage.

    • No posts here yet

  61. LinkTap

    Running on PG3 - LinkTap irrigation Node Server

    • No posts here yet

  62. MagicHome

    Running on PG3 - MagicHome Node Server for MagicHome(tm) compatible smart bulbs and LED strip controllers. This should work with all "smart" bulbs that can be controlled by the MagicHome(tm) App.

    87
    posts

  63. MessanaRadiant

    Running on PG3 - Node Server to control Messana Radiant Cooling/Heating system

    • No posts here yet

  64. Meteobridge

    Running on PG3 - Interface with Meteobridge weather server

    7
    posts

  65. MiLight

    Running on PG3 - Provides an interface between MilLight iBox 1 or 2 and PG3

    • No posts here yet

  66. MQTT

    Running on PG3 - MQTT 

    301
    posts

  67. MyQ

    Running on PG3 - MyQ  (No longer active) 

    392
    posts

  68. MySmartBlinds

    Running on PG3 - MySmartBlinds *Only support Blind and required a Bridge*

    • No posts here yet

  69. NanoLeaf

    Running on PG3 - Control NanoLeaf aurora panel light

    1
    post

  70. NestSDM

    75
    posts

  71. Netatmo

    Running on PG3 - Netatmo

    14
    posts

  72. NOAA

    Running on PG3 - Add weather data to the ISY994

    64
    posts

  73. Notification

    Running on PG3 - Notification Node Server for Pushover

    489
    posts

  74. Noyito-Relay

    Running on PG3 - Noyito USB Relay boards

    7
    posts

  75. Onkyo

    Running on PG3 - Basic control of Onkyo AV receivers

    7
    posts

  76. OnkyoAVR

    Running on PG3 - Control/Status for Onkyo or Pioneer AVR.

    • No posts here yet

  77. OpenSprinkler

    Running on PG3 - OpenSprinkler - A simple node server gets data from Open Sprinkler at every short poll interval.

    42
    posts

  78. OpenWeatherMap

    Running on PG3 - Add weather data from OpenWeatherMap.org. Includes current conditions and daily forecasts

    251
    posts

  79. Ping

    Running on PG3 - A simple node server to ping devices.

    6
    posts

  80. Plex-WebHook

    Running on PG3 - Service to received Plex Webhooks and relay information to ISY

    4
    posts

  81. PurpleAir

    Running on PG3 - Add air quality data to the ISY994
     

    43
    posts

  82. Push

    Running on PG3 - Send notifications via PushOver (https://pushover.net)

    11
    posts

  83. Rachio

    Running on PG3 - Rachio water controller Node Server for the ISY

    115
    posts

  84. RainMachine

    Running on PG3 - Node Server for the Green Electronics RainMachine

    91
    posts

  85. ratgdo

    Running on PG3

    306
    posts

  86. Ring

    Running on PG3 - The Ring nodeserver creates nodes for your doorbells, stickup cams & floodlights.

    201
    posts

  87. Roku

    Running on PG3 - Control Roku media devices.
     

    59
    posts

  88. Roomba

    Running on PG3 - Provides status and control of one or more Roomba devices.

    85
    posts

  89. Russound

    Running on PG3 - Control and status for Russound CAV whole house audio devices

    95
    posts

  90. RYSE-shades

    Running on PG3 - RYSE SmartShades node server. For more information about RYSE products see https://www.helloryse.com

    10
    posts

  91. Schlage

    Running on PG3 - Schlage

    44
    posts

  92. Sense

    Running on PG3 - Sense Home Energy Monitoring
     

    4
    posts

  93. Sensibo

    Running on PG3 - Sensibo Smart Air Conditioner Node Server

    45
    posts

  94. ShellyRGBW2

    Running on PG3 - Connect Shelly RGBW2 devices to ISY

    25
    posts

  95. SolarEdge

    Running on PG3 - Solar Edge Cloud Integration

    69
    posts

  96. Somfy

    Running on PG3 - Somfy URTSii Node Server

    1
    post

  97. Sonos

    Running on PG3 - Add Sonos control/status to the ISY.

    54
    posts

  98. SpanIO

    Running on PG3

    5
    posts

  99. ST-EcoWitt

    Running on PG3 - EcoWitt Personal Weather Station and Add-On Sensors

    24
    posts

  100. ST-Inventory

    Running on PG3 - Inventory collection of the ISY devices (nodes).

    137
    posts

  101. ST-Nuheat

    Running on PG3 - Nuheat Signature Thermostat Integration

    84
    posts

  102. ST-Sonos

    Running on PG3 - Sonos Integration

    184
    posts

  103. Sun

    Running on PG3 - Sun and Moon tracker

    23
    posts

  104. Tasmota

    15
    posts

  105. TeslaEV

    Running on PG3 - Node Server to control Tesla EVs requires user to supply refresh Token - see ReadMe on how-to

    275
    posts

  106. TeslaPW

    Running on PG3 - Tesla Power Wall Control (OLD API - no longer supported)
    For support visit:  https://forum.universal-devices.com/forum/444-teslapw2/

    29
    posts

  107. TeslaPW2

    ***NEW TESLA API***

    51
    posts

  108. Timedata

    Running on PG3 - An ephemeris node server for Polyglot V3 on Polisy

    96
    posts

  109. TotalConnect

    Running on PG3 - This project is a node server to integrate Honeywell Total Connect v2 security systems into the UDI ISY.

    41
    posts

  110. Twinkly

    Running on PG3 - Twinkly Light

    1
    post

  111. UnifiPresence

    Running on PG3 - UniFi Device Network Presence Detection

    46
    posts

  112. UnifiProtect

    Running on PG3 - This Poly provides an interface between Unifi Protect and Polyglot v3 server. This node server currently only supports changing the recording mode.
    ** Not supported **

    • No posts here yet

  113. VenstarCT

    Running on PG3 - Accesses Venstar ColorTouch series thermostats through a local API.

    85
    posts

  114. Virtual

    Running on PG3 - Create Virtual Devices

    136
    posts

  115. VirtualButtons

    Running on PG3 - Trigger Alexa Routines using Virtual Buttons

    9
    posts

  116. Volumio

    Running on PG3 - Add control of Volumio media players
     

    38
    posts

  117. VUE

    Running on PG3 - Monitor your smart meter with Emporia VUE

    181
    posts

  118. Wake-On-Lan

    Running on PG3 - Send WOL packets to hosts

    34
    posts

  119. WeatherBit

    Running on PG3 - Add weather data from WeatherBit.io. Includes current conditions and daily forecasts

    109
    posts

  120. WeatherFlow

    Running on PG3 - Make WeatherFlow weather station data available to the ISY.

    323
    posts

  121. WeatherLink

    Running on PG3 - Pull weather data from a Davis weather station using WeatherLink Live's local device API.
     

    71
    posts

  122. WeatherPoly

    Running on PG3 - Receive weather data from locally configured station software like meteobridge, Cumulus, WeeWx, acuparse, etc.
     

    32
    posts

  123. WebControl

    Running on PG3 - WebControl8 and WebControl832

    58
    posts

  124. Wemo

    Running on PG3 - Provide ISY support for Wemo devices via Polyglot.

    • No posts here yet

  125. WirelessTag

    Running on PG3 - CAO Gadgets Wireless Sensor Tags www.wirelesstag.net

    380
    posts

  126. WLED

    Running on PG3 - Interface between WLED and PG3. 
     

    20
    posts

  127. YoLink

    Running on PG3 - Nodeserver to allow integration of Yolink devices

    782
    posts

  128. YouTube

    YouTube plugin allows you to import your YouTube playlists and shuffle/play them through eisy. For Bluetooth speakers, you do need the Bluetooth plugin.

    12
    posts
×
×
  • Create New...