I think it was my fault not rebooting the polisy. I was doing shutdown now -r and should have been shutdown -r now , or better to use sudo reboot

I will try this next time to make sure the argument order is correct. I am used to linux which doesn't have this issue.

However in admin console, restart IoX doesnt seem to work and it hangs, I have to restart again via ssh eg... sudo service isy restart maybe that is not supported command anymore and is old.

13 hours ago, Michel Kohanim said:

I'd like to hijack this thread and tease you with our upcoming feature: eisy-ai !

With kind regards,
Michel

Can’t be wait to use it to write programs (maybe not as I enjoy using the brain cells) and do research. Thanks, Michel.

I’ve not seen it discussed here (could have missed it) but starting with 6.1.1 from Michel’s release notes there is a built in restore point that enables us to revert back to the prior version if something happens during an upgrade.

Look at eISY-ui System Boot environment. My upgrades have always been fine but it’ll be beyond value if one ever fails. My home is run by eISY. Saying happy wife happy life. Add to that happy eISY I’m not too busy.

13 hours ago, hart2hart said:

Can’t be wait to use it to write programs (maybe not as I enjoy using the brain cells) and do research. Thanks, Michel.

Already does very complex ones and can spot and fix errors.

With kind regards,

Michel

I may well be the slowest guy on this forum! I managed to upgrade the unit to the new firmware - no issues that I can see so far. Took less than 20 minutes...

I had to do the usual Java deletes in order for the AC to work - no problem there, Then I notes that the desktop icon was gone and the only way to access AC was through http://isy.ip/admin.jnlp . Worked fine. But I've tried everything I know to re-establish the UD icon for faster logins. The old tried and true way will not leave an icon.

13 hours ago, Michel Kohanim said:

Already does very complex ones and can spot and fix errors.

With kind regards,

Michel

Very interesting Michel, can the eISY AI do a review of all my Programs to determine if there are any problems that need to be addressed? Like AGY AI?

On 8/18/2026 at 10:58 AM, Greg P. said:

Upgrade itself seemed to go smooth but after finishing and rebooting, my eISY UI customized Home Page is gone. Any way to get that back without re-creating it?

I didn't see a response to this post. Is there a way to get Customized Home Page back?

33 minutes ago, pkelley said:

I didn't see a response to this post. Is there a way to get Customized Home Page back?

I think you have to rebuild it...

Edited yesterday at 06:03 PM1 day by JimTurner
More info

1 hour ago, mmb said:

Very interesting Michel, can the eISY AI do a review of all my Programs to determine if there are any problems that need to be addressed? Like AGY AI?

@mmb , currently, if you give it a problem, such as why this is/is not happening, it will review your logs, then reviews all your programs to come up with a reason. It can also summarize all your programs in a folder as well as find relevant programs. It can also figure out if the logic doesn't make sense. What it can't (yet) do is to answer generic questions without any context. For instance, what type of problems?

Also, this plugin is configurable to use Claude, ChatGPT, and Grok. So the more expensive the model you use, the better the reasoning. Everything I described above is based on the least expensive models (Claude Haiku and GPT Luna).

With kind regards,

Michel

25 minutes ago, Michel Kohanim said:

@mmb , currently, if you give it a problem, such as why this is/is not happening, it will review your logs, then reviews all your programs to come up with a reason.

I get a sense that it might get incorporated into UDI's support, possibly as a self-help screening process if you want to open a ticket. Not that I'm against the idea. Just something that seems to be in the queue. It could be useful for some of the usual questions that can be hard to search on the forum, such as "What updates are still supported on the Polisy?" or "What is the proper procedure to replace a Insteon PLM?".

3 hours ago, aLf said:

re-establish the UD icon for faster logins. The old tried and true way will not leave an icon.

@aLf Make sure the "Keep temporary files on my computer" box in Java Control Panel>Temporary File Settings is checked.

7 hours ago, Guy Lavoie said:

I get a sense that it might get incorporated into UDI's support, possibly as a self-help screening process if you want to open a ticket.

Well AI engines have pretty much sucked up all knowledge on the internet, so my goto when I have a question as you suggested is just head to Gemini or AGY.

For me what will be nice is eISY’s plug-in to dig into logs and coding, and suggest/make changes.

Started my upgrade and it proceeds as expected then stops and says Check Logs? I see nothing in the logs... I will open a ticket

20 hours ago, pkelley said:

I didn't see a response to this post. Is there a way to get Customized Home Page back?

First of all, it would be very odd to lose the Favorites page following an upgrade. Did you restore a backup or something?

The only solution really is to restore a backup from just before the upgrade.

Just restore eisy-ui, like this:

4 minutes ago, bmercier said:

First of all, it would be very odd to lose the Favorites page following an upgrade. Did you restore a backup or something?

The only solution really is to restore a backup from just before the upgrade.

Just restore eisy-ui, like this:

No Restores were performed. Upgrade went pretty much as expected. I did have issues with 2 plugins (iox-matter and VenstarCT). A second restart resolved the VenstarCT problem, and I had to reinstall iox-matter to resolve that issue. All is working exactly or better than it did before the upgrade. Losing the Custom Page is not a big deal this time. I'm really liking what you can do with the new UI after this upgrade, so will be a bigger deal if it happens again.

9 hours ago, Michel Kohanim said:

@mmb , currently, if you give it a problem, such as why this is/is not happening, it will review your logs, then reviews all your programs to come up with a reason. It can also summarize all your programs in a folder as well as find relevant programs. It can also figure out if the logic doesn't make sense. What it can't (yet) do is to answer generic questions without any context. For instance, what type of problems?

Also, this plugin is configurable to use Claude, ChatGPT, and Grok. So the more expensive the model you use, the better the reasoning. Everything I described above is based on the least expensive models (Claude Haiku and GPT Luna).

With kind regards,

Michel

On 8/28/2026 at 10:52 PM, brians said:

I think it was my fault not rebooting the polisy. I was doing shutdown now -r and should have been shutdown -r now , or better to use sudo reboot

I will try this next time to make sure the argument order is correct. I am used to linux which doesn't have this issue.

However in admin console, restart IoX doesnt seem to work and it hangs, I have to restart again via ssh eg... sudo service isy restart maybe that is not supported command anymore and is old.

To clarify, I was using restart IoX in a program (action, system, restart IoX). The System program action's "Restart IoX" doesn't restart it fully and hung needing service isy restart to recover. The Configuration menu's reboot works fine and appears to use a different method as it restarts the entire Polisy. Therefore should the program action be pointed at that one or is this something specific to my Polisy and fixed or not issue in EISY? Or this this old and nobody uses anymore? I honestly see no use for it on a regular basis but maybe someone does.