hart2hart

Curious, when you said updating manually earlier in the thread, did you mean manually at the switch or from eisy console? Based on what you just posted, it does appear there might be an issue on eisy that @IndyMike csn help you understand Also, I asked AI a different way and it said updates were minimum of 100,000 writes which I used to update my prior post.

Did a quick bit of AI and the storage used for those settings is typically rated at 1.000 to 10,000 update cycles so at twice a day that would be 1.4 years to 10x that time. I’m careful with AI but maybe not enough this time. Went deeper and got this: “Insteon switches use EEPROM memory (often SST39VF040 or similar) for settings, with a guaranteed endurance of 100,000 write/erase cycles per sector. Actual lifespan often exceeds this minimum in practice, as noted in general EEPROM discussions, though exact chip specs for all models aren’t always public.”

Hope I’m recalling this correctly but some have mentioned that the memory where those settings are stored has a limited life of updates. Your doing it manually supports this as a possible cause if by manually you mean at the switch.

If your main home has many more devices, you might try increasing the memory Java can use. I use 1024 Open Control Panel. 2. Open Java. 3. Go to the Java tab. 4. Click View under Java Applet Runtime Settings. 5. Select the JRE version your browser uses. 6. In Runtime Parameters, enter something like  -Xmx512m . 7. Click OK and restart all browser windows.[xzbackup +1] Important notes •  -Xmx  sets the maximum heap size; for example,  -Xmx1024m  means 1 GB.[reddit +1]

As I recall the out of memory on a program is misleading. It typically meant a device or variable that was used in the program has been deleted.

Yes, create a scene and add them to it. Be careful to indicate controller or responder. Also, you can tell it to erase old links. A small flat head screen driver makes pulling the tab very simple without fear of breakage.

There has been a minor update auto pushed. Don’t recall which version but I believe the version you’re upgrading from and to may require UD assistance. I’d enter a ticket to get directions.

I feel I’m missing something but how about putting the device in its own scene and then using adjust scene to make changes?

There is a setting in user preferences to open to favorites.

Reboot.

Not better just different… I backup text copies of all programs using Copy Folder to Clipboard. With resulting file I will use a text editor for find to review and research issues.

If sensor is off/on (whichever means not full) Wait 10 minutes Set micro relay on that turns on pump Else Set micro relay off that controls pump

I didn’t read all of the background but I’d guess he meant restore the backup that you made prior to the upgrade.

The scenes per button were a little daunting to setup but they’ve been flawless for me. The plus for me is it’s there and doesn’t need a controller to work so if eISY happens to be offline or you get line noise etc it still functions.

Reboot and it will go away. It’s a bug from one of later releases.

Glad I could help.

Reboot and it will clear.

As I recall, the number on switch likely refers to the hardware version. It might uptick if for example a larger capacitor was specified. eISY is reporting the onboard firmware version.

Typically a reboot

By name they appear time for a a portion of the If. Is your time zone set correctly?

Green means the last time executed it was True and Red means it was False. The ones in Yellow are the ones you should look at.

Done and good. Thanks.

I too updated both an eISY r1 and r2 (in burn in mode). The only quick item I noticed was when opening PG3x dashboard it says IoX Version: 6.0.4 Connected instead of 6.0.5

@Techman Great! Are there release notes posted? Nevermind. Found it.

The name is likely in Alexa from the ISY if you had one.