Update from 6.0.4 to 6.0.5 went smoothly. No issues.

@Techman Great! Are there release notes posted?

Nevermind. Found it.

Edited 8 hours ago8 hr by hart2hart

@hart2hart https://forum.universal-devices.com/topic/46475-updated-software-available/

I too seemed to be able to update without issue...maybe. Took less than 5 minutes. I think about 7 minutes including the reboot based on notifications from UD Mobile.

Two issues I experienced:

• eisy_ui had issues logging in giving this error: "Timeout waiting for PG3 UI Session" (using Chrome)

• Plugin dashboard did not load (just showed blank page) (using Chrome)

Just closing chrome and re-opening it seemed resolve the problems. The unit seemed to be okay to login so not sure why the errors were being given, but seemed to load fine on Firefox so restarted Chrome and things worked as expected.

I confirmed with https://eisy.local:8443/WEB/sysconfig.txt that all systems updated to versions that @Michel Kohanim posted in link above. Nice work UD!

PS: If you are using the java admin console and using the device credentials (i.e. https://eisy.local:8443/desc w/ local user/pass) you will need to clear java cache if using IoX Launcher/Finder (be sure you check all three boxes!). If you use the admin.jnlp direct download from the unit you'll also need to clear the java cache and download a fresh admin.jnlp so that UI and Firmware match.

I too updated both an eISY r1 and r2 (in burn in mode). The only quick item I noticed was when opening PG3x dashboard it says

IoX Version: 6.0.4   Connected instead of 6.0.5

My PG3 dashboard shows 6.0.5

Painless upgrade here. Had to clear the Java cache as described below to use the admin console. So far, all is well.

1 hour ago, Geddy said:

PS: If you are using the java admin console and using the device credentials (i.e. https://eisy.local:8443/desc w/ local user/pass) you will need to clear java cache if using IoX Launcher/Finder (be sure you check all three boxes!). If you use the admin.jnlp direct download from the unit you'll also need to clear the java cache and download a fresh admin.jnlp so that UI and Firmware match.

1 hour ago, hart2hart said:

when opening PG3x dashboard it says

IoX Version: 6.0.4   Connected instead of 6.0.5

Try to reboot your device. Then also only access dashboard through eisy_ui and see if the versions are updated. Also, try the sysconfig.txt link above to see if the versions are updated. Lastly, relaunch the browser and refresh the page. Could be a browser cache display issue.

I just upgraded my three test Polisys to 6.0.5 (yup I have three of them now, I'm a sucker for punishment!). All were at 6.0.4.

Polisy 1 is running the Elk plugin in demo mode. Plugin came right up fine after reboot

Polisy 2 is set up with the Zooz zwave dongle, with a test device (Jasco zwave plug in module). That came right back up and the device functional

Polisy 3 is set up with the ZMatter dongle, with a Zigbee test device that I added earlier today(Jasco zigbee plugin module), The two node screens came up blank in admin console after the upgrade. I right clicked on the module and did Zigbee -> Synchronize -> Update with interview, and that brought back the module controls, and they worked fine.

Polisys 2 and 3 are the ones I was using to test Zooz to ZMatter migrations earlier this week (and failed). The release notes didn't mention anything about zwave but it might be worth retrying following this upgrade.

I'll wait a bit for more feedback from others before upgrading my eisy.

My IoX finder is set up with the actual IP addresses for each controller. I had no need to do any java cache clearing or anything.

It would be interesting to have a bit more information about some of the items mentioned in the release announcement:

• "Support for manual static ip config" is static IP configuration back? I'm not seeing it in the Configuration screen.

• "Improved Matter support" what exactly? Reliability? Better device interview results?

• Minimum previous version 5.9.1 What does someone do if they have a lower version? It's not like the isy994i where you can download older versions.

42 minutes ago, Geddy said:

Try to reboot your device. Then also only access dashboard through eisy_ui and see if the versions are updated. Also, try the sysconfig.txt link above to see if the versions are updated. Lastly, relaunch the browser and refresh the page. Could be a browser cache display issue.

Done and good. Thanks.

Opening a ticket, but was upgrading from 6.0.3. IoX is 6.0.5_1, other versions are up to date. After install and reboot, home page shows "Error loading nodes" for all nodes. Nodes page shows "Error: Internal server error". Tried clearing java cache, unplugging eisy, and clearing browser cache, none of which worked.

polISY
--------

Updated to v6.0.5 from v6.0.4. Went smoothly. Asked for and needed a reboot to operate properly.

IoX needed no updating and java cache was not cleared.

Edited 2 hours ago2 hr by larryllix

Tried to update and now the admin console says "Completing Initialization" for a long time, followed by something like unable to load IoX nodes and then prompted to exit the AC -followed by the AC not being detected/accessible at all - cycled power multiple times but it leads to the same state and the eisy is not working - I can ssh into the eisy, though but don't know what to do to recover wish I didn't attempt this software update

Edited 36 minutes ago36 min by JTsao
update