Jump to content

Polyglot v3 (PG3x)

Polyglot v3 (PG3x) - Help, Support, and general discussion for individual Plugins

NOTE: If you are using a Polisy please be sure to upgrade to PG3x if you are having plugin issues. Note that updating to PG3x will remove access to PG2.
Upgrade process outlined in the wiki: https://wiki.universal-devices.com/Polisy:User_Guide#Upgrading_to_PG3x
There is no "UNDO" for this process. Run backups before you proceed.

Forums

  1. PG3 - Non-Production Store

    Node Servers currently found in the PG3 "Non-Production Store"
    These are often new development releases, but also could be beta and update releases not yet put into production.
    If a Node Server has not been put into the Production Store then discuss it here. 

    271
    posts

  2. AcuRite

    Running on PG3 - A Node Server for retrieving AcuRite Access Remote data for AcuRite devices

    40
    posts

  3. AERISWeather

    Running on PG3 - Add AERISWeather service weather data to the eisy and Polisy

    67
    posts

  4. AGAPI

    Running on PG3

    • No posts here yet

  5. Airscape

    Running on PG3 - Airscape Node Server

    3
    posts

  6. Airthings-C

    Running on PG3 - Airthings Consumer Products

    230
    posts

  7. Ambient Console and Weather

    Running on PG3 - AmbientConsole and AmbientWeather plugins

    215
    posts

  8. AMINEM

    Running on PG3

    • No posts here yet

  9. AudioPlayer

    Running on PG3 - Simple AudioPlayer that sends audio files to the headphone jack on eisy. It comes with a default set of mp3 files (chimes, bells, etc.) but you can use your own as well. 

     

    227
    posts

  10. August

    Running on PG3 - This Poly provides an interface between August Connect and Polyglot v3 server. This is very rough polyglot, but does work to control one lock. Has only been tested on Polisy. The status will update based on the short Poll value. Experimental use at your own risk

    23
    posts

  11. Autelis

    Running on PG3 - Interfaces with an Autelis Pool Control device to allow IoX to access Jandy/Zodiac Aqualink pool controllers.

    3
    posts

  12. AVRemote

    Running on PG3 - Universal A/V remote control. Supported: nVidia Shield, LG TV, Tivo, Denon AVR, Onkyo AVR, ESP8266 IR, Chromecast.
    Note: This is a PG3 port of the PG2 NS written by firstone.

    89
    posts

  13. AVServer

    Running on PG3 - Generic A/V Node Server that supports unsolicited status responses from the devices. Currently supports Pioneer VSX-1021, Sony Bravia XBR-65X810C.

    5
    posts

  14. Backup

    Running on PG3 - Save and restore lighting type device status

    16
    posts

  15. BalboaSPA

    Running on PG3 - Control spa equipped with a Balboa BP system and a bwa™ Wi-Fi Module (50350)

    6
    posts

  16. Bambulab

    Running on PG3 - Monitor and control of Bambu Lab 3D printers

    6
    posts

  17. BASAO

    Running on PG3 - Universal Devices Analog output Node Server. Using the Contemporary Controls BASpi-6u4r2ao control device or the Edge Device that is configured with six universal input, four relay outputs and two analog outputs, 0-10vdc or 4-20mA. These controllers sit on a raspberry pi and are WiFi/Ethernet IP reachable from your intranet (internal IP network). These controllers are fully BacNet compatible and can be brought into any BacNet system by manufacturers like Tridium, Automated Logic, Carrier full interoperability.

    1
    post

  18. BASGARAGE

    Running on PG3 - WiFi Controlled Garage door opener momentary push button duplicator, with optional local camera for up to six (6) doors.

    3
    posts

  19. BASIRRIGATION

    Running on PG3 - Universal Devices WiFi Controlled irrigation controller, with optional local camera for up to thirty six (36) irrigation Zones. It utilizes up to six (6) Contemporary Controls BASpi-6u6r or the BASpi-Edge-6u6r. Please see documentation.

    1
    post

  20. BASPIAO

    Running on PG3

    • No posts here yet

  21. BASPI6U6R

    Running on PG3

    • No posts here yet

  22. BASPOOL

    Running on PG3 - Universal Devices Wifi Ethernet Pool Controller using the Contemporary Controls BASpi-6u6r or the BASpi-Edge-6u6r control Devices. You can have up to (6) pools using this Node Server and it is a great fit for a conventional Time Clock controlled pool upgrades. Please see GitHub documentation for details on setup.

    2
    posts

  23. Blink

    Running on PG3 - Node Server to control Blink Camera System

    63
    posts

  24. BlueIris

    Running on PG3 - Blue Iris Polyglot v3 Node Server

    46
    posts

  25. Bluetooth

    Running on PG3

    25
    posts

  26. Bond

    Running on PG3 - Bond Node Server 

    249
    posts

  27. Camect

    Running on PG3 - Camect UDI Polyglot V3 Node Server

    40
    posts

  28. Caseta

    Running on PG3 - Integrate with Lutron's Caséta Wireless systems. Designed specifically to work with the Smart Bridge but should also work with Smart Bridge Pro and possibly RA2 Select. Supports Shades, Pico Remotes Dimmers, Switches, Plugs and Occupancy Sensors.

    98
    posts

  29. Climacell

    Running on PG3 - Add weather data from Tomorrow.io. Includes current conditions and daily forecasts

    59
    posts

  30. DavisWeather

    Running on PG3 - Pull weather data from Davis WeatherLink console uploads (Not WeatherLink Live)

    39
    posts

  31. Drop

    Running on PG3

    1
    post

  32. DSDTech-Relay

    Running on PG3 - DSD Tech USB Relay

    • No posts here yet

  33. DysonPureCool

    Running on PG3 - for DysonPureCool fan series 

    41
    posts

  34. Eagle-200

    Running on PG3 - Smart Home Energy Monitor. Monitor home electricity use.

    16
    posts

  35. Ecobee

    Running on PG3 - Ecobee Node Server

    280
    posts

  36. eISYIR

    Running on PG3 - Add IR receiver functionality to eISY/Polisy via Flirc IR receiver

    113
    posts

  37. ELK

    Running on PG3 - ELK Alarm System Node Server

    1.1k
    posts

  38. EnvisaLink-DSC

    Running on PG3 - EnvisaLink-DSC

    194
    posts

  39. EnvisaLink-HW

    Running on PG3 - Accesses Honeywell VISTA alarm panels via EnvisaLink EVL-3/4 and DUO adapters from EyezOn for IoX access to alarm functions and events.

    47
    posts

  40. eWeLink

    Running on PG3 - A Node Server for Controlling eWeLink Devices

    1
    post

  41. Flair

    Running on PG3 - Control Flair Vents and Puck 

    22
    posts

  42. FlumeWater

    Running on PG3 - FlumeWater Node Server

    132
    posts

  43. Govee

    Running on PG3 - Control Govee Wifi led strip

    78
    posts

  44. HarmonyHub

    Running on PG3 - Connect Harmony Hub's to the eisy and Polisy

    182
    posts

  45. Holidays

    Running on PG3 - Maintains list of holidays and vacations

    17
    posts

  46. HolidaysGoogle

    Running on PG3 - Holidays for IoX scheduling using Google Calendar

    73
    posts

  47. HoneywellHome

    Running on PG3 - A node server to integrate Honeywell Home thermostats into IoX on eisy and Polisy.

    77
    posts

  48. Hubitat

    Running on PG3 - Hubitat Node Server

    34
    posts

  49. Hue

    Running on PG3 - Connect Phillips Hue Personal Wireless Lighting system to the eisy and Polisy.

    301
    posts

  50. HueEmulator

    Running on PG3 - Hue Emulator 

    100
    posts

  51. Hunter Douglas

    Running on PG3

    267
    posts

  52. HusqvarnaMower

    Running on PG3 - Husqvarna Mower: A node server for control of AutoMower
     

    1
    post

  53. iAquaLink

    Running on PG3 - Accesses the iAquaLink™ cloud service to allow IoX control Jandy® AquaLink® pool controllers and accessories.

    45
    posts

  54. IFTTT-Webhooks

    Running on PG3 - IFTTT Webhooks integration - https://ifttt.com/maker_webhooks 

    49
    posts

  55. Intesis

    Running on PG3 - Node Server for Intesis Heat Pump or A/C WMP interfaces

    1
    post

  56. iopool

    Running on PG3 - Interface with iopool public API to allow IoX to access iopool EcO pool monitors

    3
    posts

  57. iox-matter

    Running on PG3

    87
    posts

  58. iTach IR

    Running on PG3 - iTach IR - Node Server which accepts the entire codeset for devices from the Global Cache Control Tower Database.

    104
    posts

  59. Kaiterra

    Running on PG3 - Air Quality monitoring for Kaiterra Laser Egg or Sensedge devices.

    3
    posts

  60. Kasa (TP-Link)

    Running on PG3 - TP-Link Kasa Node Server

    579
    posts

  61. LiFX

    Running on PG3 - Add LIFX control to the eisy & Polisy

    128
    posts

  62. Linez

    Running on PG3 - The Linez Power Monitors were produced by the now defunct JLM Energy based in Rocklin California and were used, 1 per panel, mostly in residential, to monitor building, solar and grid usage.

    • No posts here yet

  63. LinkTap

    Running on PG3 - LinkTap irrigation Node Server

    • No posts here yet

  64. MagicHome

    Running on PG3 - MagicHome Node Server for MagicHome(tm) compatible smart bulbs and LED strip controllers. This should work with all "smart" bulbs that can be controlled by the MagicHome(tm) App.

    92
    posts

  65. Meross

    Running on PG3

    42
    posts

  66. MessanaRadiant

    Running on PG3 - Node Server to control Messana Radiant Cooling/Heating system

    • No posts here yet

  67. Meteobridge

    Running on PG3 - Interface with Meteobridge weather server

    11
    posts

  68. MiLight

    Running on PG3 - Provides an interface between MilLight iBox 1 or 2 and PG3

    • No posts here yet

  69. ModbusTCP

    Running on PG3

    8
    posts

  70. MQTT

    Running on PG3 - MQTT 

    380
    posts

  71. MyQ

    Running on PG3 - MyQ  (No longer active) 

    392
    posts

  72. MySmartBlinds

    Running on PG3 - MySmartBlinds *Only support Blind and required a Bridge*

    • No posts here yet

  73. NanoLeaf

    Running on PG3 - Control NanoLeaf aurora panel light

    1
    post

  74. NestSDM

    78
    posts

  75. Netatmo

    Running on PG3 - Netatmo

    15
    posts

  76. NOAA

    Running on PG3 - Add weather data to the eisy and Polisy

    72
    posts

  77. Notification

    Running on PG3 - Notification Node Server for Pushover

    510
    posts

  78. Noyito-Relay

    Running on PG3 - Noyito USB Relay boards

    7
    posts

  79. Onkyo

    Running on PG3 - Basic control of Onkyo AV receivers

    7
    posts

  80. OnkyoAVR

    Running on PG3 - Control/Status for Onkyo or Pioneer AVR.

    • No posts here yet

  81. OpenSprinkler

    Running on PG3 - OpenSprinkler - A simple node server gets data from Open Sprinkler at every short poll interval.

    42
    posts

  82. OpenWeatherMap

    Running on PG3 - Add weather data from OpenWeatherMap.org. Includes current conditions and daily forecasts

    254
    posts

  83. Ping

    Running on PG3 - A simple node server to ping devices.

    6
    posts

  84. Plex-WebHook

    Running on PG3 - Service to received Plex Webhooks and relay information to IoX

    4
    posts

  85. PurpleAir

    Running on PG3 - Add air quality data to the eisy and Polisy
     

    43
    posts

  86. Push

    Running on PG3 - Send notifications via PushOver (https://pushover.net)

    11
    posts

  87. Rachio

    Running on PG3 - Rachio Water Controller plugin for the eisy and Polisy.

    124
    posts

  88. RainMachine

    Running on PG3 - Node Server for the Green Electronics RainMachine

    93
    posts

  89. ratgdo

    Running on PG3

    355
    posts

  90. Ring

    Running on PG3 - The Ring nodeserver creates nodes for your doorbells, stickup cams & floodlights.

    218
    posts

  91. Roku

    Running on PG3 - Control Roku media devices.
     

    59
    posts

  92. Roomba

    Running on PG3 - Provides status and control of one or more Roomba devices.

    91
    posts

  93. Russound

    Running on PG3 - Control and status for Russound CAV whole house audio devices

    104
    posts

  94. RYSE-shades

    Running on PG3 - RYSE SmartShades node server. For more information about RYSE products see https://www.helloryse.com

    10
    posts

  95. Schlage

    Running on PG3 - Schlage

    103
    posts

  96. Sense

    Running on PG3 - Sense Home Energy Monitoring
     

    4
    posts

  97. Sensibo

    Running on PG3 - Sensibo Smart Air Conditioner Node Server

    72
    posts

  98. ShellyRGBW2

    Running on PG3 - Connect Shelly RGBW2 devices to IoX on the eisy and Polisy

    31
    posts

  99. SolarEdge

    Running on PG3 - Solar Edge Cloud Integration

    69
    posts

  100. Somfy

    Running on PG3 - Somfy URTSii Node Server

    2
    posts

  101. Sonos

    Running on PG3 - Add Sonos control/status to IoX on eisy and Polisy.

    54
    posts

  102. SpanIO

    Running on PG3

    5
    posts

  103. ST-EcoWitt

    Running on PG3 - EcoWitt Personal Weather Station and Add-On Sensors

    24
    posts

  104. ST-Inventory

    Running on PG3 - Inventory collection of the IoX devices (nodes).

    137
    posts

  105. ST-Nuheat

    Running on PG3 - Nuheat Signature Thermostat Integration

    84
    posts

  106. ST-Sonos

    Running on PG3 - Sonos Integration

    184
    posts

  107. Sun

    Running on PG3 - Sun and Moon tracker

    23
    posts

  108. Tasmota

    37
    posts

  109. TeslaEVStream

    Running on PG3

    321
    posts

  110. TeslaPW

    Running on PG3 - Tesla Power Wall Control (OLD API - no longer supported)
    For support visit:  https://forum.universal-devices.com/forum/444-teslapw2/

    29
    posts

  111. TeslaPW2

    ***NEW TESLA API***

    57
    posts

  112. Timedata

    Running on PG3 - An ephemeris node server for Polyglot V3 on Polisy

    96
    posts

  113. TotalConnect

    Running on PG3 - This project is a node server to integrate Honeywell Total Connect v2 security systems into IoX on eisy and Polisy.

    41
    posts

  114. Twinkly

    Running on PG3 - Twinkly Light

    1
    post

  115. UnifiPresence

    Running on PG3 - UniFi Device Network Presence Detection

    47
    posts

  116. UnifiProtect

    Running on PG3 - This Poly provides an interface between Unifi Protect and Polyglot v3 server. This node server currently only supports changing the recording mode.
    ** Not supported **

    • No posts here yet

  117. VenstarCT

    Running on PG3 - Accesses Venstar ColorTouch series thermostats through a local API.

    87
    posts

  118. Virtual

    Running on PG3 - Create Virtual Devices

    215
    posts

  119. VirtualButtons

    Running on PG3 - Trigger Alexa Routines using Virtual Buttons

    9
    posts

  120. Volumio

    Running on PG3 - Add control of Volumio media players
     

    38
    posts

  121. VUE

    Running on PG3 - Monitor your smart meter with Emporia VUE

    190
    posts

  122. Wake-On-Lan

    Running on PG3 - Send WOL packets to hosts

    34
    posts

  123. WeatherBit

    Running on PG3 - Add weather data from WeatherBit.io. Includes current conditions and daily forecasts

    130
    posts

  124. WeatherFlow

    Running on PG3 - Make WeatherFlow weather station data available to IoX on eisy and Polisy.

    337
    posts

  125. WeatherLink

    Running on PG3 - Pull weather data from a Davis weather station using WeatherLink Live's local device API.
     

    71
    posts

  126. WeatherPoly

    Running on PG3 - Receive weather data from locally configured station software like meteobridge, Cumulus, WeeWx, acuparse, etc.
     

    32
    posts

  127. WebControl

    Running on PG3 - WebControl8 and WebControl832

    63
    posts

  128. Wemo

    Running on PG3 - Provide IoX support for Wemo devices via Polyglot.

    3
    posts

  129. WirelessTag

    Running on PG3 - CAO Gadgets Wireless Sensor Tags www.wirelesstag.net

    395
    posts

  130. WLED

    Running on PG3 - Interface between WLED and PG3. 
     

    20
    posts

  131. YoLink

    Running on PG3 - Nodeserver to allow integration of Yolink devices

    1k
    posts

  132. YouTube

    YouTube plugin allows you to import your YouTube playlists and shuffle/play them through eisy. For Bluetooth speakers, you do need the Bluetooth plugin.

    12
    posts
×
×
  • Create New...